Replaces

EGR Valve Wells Vehicle Electronics EGR4350 - WEEGR00008

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

WELLS EGR VALVE: EGR4350

Specifications:

  • Brand New Wells EGR Valve
  • Replaces dealer part numbers: 53032-509AF, 53032-509AG, 53032-509AH, 53032-509AI, 53032-509AJ, 53032-509AL, 53032-509AM, 53032509AF, 53032509AG, 53032509AH, 53032509AI, 53032509AJ, 53032509AL, 53032509AM
  • Direct Fit
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake (0:49)
    • Release the clips and open the air filter housing box
    • List the air filter housing box cover up and off
    • Release the PCV hose
    • Loosen the rear clamp on the inlet pipe
    • Remove the box cover and pipe
    • Lift the bottom of the air filter housing box up and out
    • Remove the 10mm bolt behind the alternator
    • Remove the 10mm bolt behind the oil cap
    • Lift the air box up
    • Disconnect the intake sensor
    • Remove the air box
  2. step : Removing the EGR Valve (1:54)
    • Find the EGR valve located on the front of the cylinder head on the cylinder head below the alternator
    • Disconnect the EGR wiring harness
    • Spray rust penetrant on the two 8mm bolts connecting the EGR tube to the EGR valve
    • Remove the two 8mm bolts
    • Remove the EGR tube from the valve
    • Remove the two 10mm bolts on the front of the EGR valve
  3. step : Installing the EGR Valve (3:18)
    • Lay the EGR gasket onto the valve
    • Thread the 10mm bolts onto the valve
    • Tighten the 10mm bolts
    • Torque the bolts to 20 foot-pounds
    • Secure the EGR tube into place
    • Tighten the 8mm bolts to the EGR
    • Torque the bolts to 20 foot-pounds
    • Connect the EGR wiring harness
  4. step : Reinstalling the Air Intake (3:52)
    • Insert the air box with the silicone gasket over the throttle body
    • Tighten the two 10mm bolts to the box
    • Connect the air temp sensor
    • Insert the air filter housing into its mounting spots
    • Insert the intake tube to the air box
    • Tighten the hose clamp
    • Connect the PCV hose
    • Lock the air filter housing box

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
EGR Valve replacement
My truck is a 2008 RAM 1500 with over 100,000 miles on it. The check engine light came on and the error code pointed to the EGR valve. The truck ran fine but the remote distance start would turn off after a minute, I guess it‘s a protection because of the check engine warning and engine wont run unsupervised. Ordered it and with the help of the on-line video did the job myself and I’m no mechanic. It was pretty easy and done in one hour. Disconnected the battery for a few minutes, reconnected and went for a ride and it was perfect.
January 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2008Chrysler 300 Chrysler 300 EGR Valve V8 5.7L (8th Vin Digit H) Wells Vehicle Electronics EGR4350
2007-2008Chrysler Aspen Chrysler Aspen EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
2006-2008Dodge Charger Dodge Charger EGR Valve V8 5.7L (8th Vin Digit H) Wells Vehicle Electronics EGR4350
2004-2005Dodge Durango Dodge Durango EGR Valve V8 5.7L (8th Vin Digit D) Wells Vehicle Electronics EGR4350
2006-2008Dodge Durango Dodge Durango EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
2005-2008Dodge Magnum Dodge Magnum EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
2004-2007Dodge Ram 1500 Truck Dodge Ram 1500 Truck EGR Valve V8 5.7L (8th Vin Digit D) Wells Vehicle Electronics EGR4350
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
2004-2005Dodge Ram 2500 Truck Dodge Ram 2500 Truck EGR Valve V8 5.7L (8th Vin Digit D) Wells Vehicle Electronics EGR4350
2004-2005Dodge Ram 3500 Truck Dodge Ram 3500 Truck EGR Valve V8 5.7L (8th Vin Digit D) Wells Vehicle Electronics EGR4350
2007-2008Jeep Commander (XK) Jeep Commander (XK) EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
2005-2008Jeep Grand Cherokee Jeep Grand Cherokee EGR Valve V8 5.7L (8th Vin Digit 2) Wells Vehicle Electronics EGR4350
Only 2 left in stock
Part #: WEEGR00008


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

WELLS
Brand #: EGR4350

How-to Video:

(06:16 min)