EGR Tube Dorman 598-302 - 1AEGT00023

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement EGR tube or pipe is just what you need to get your emissions system in good working order again!

EGR Tube Specifications:

  • Brand New EGR Tube
  • Replaces dealer part number: 53032511AG
  • Direct fit replacement
  • Built to strict quality control standards

This EGR tube makes a great replacement and has good cost savings over the dealer unit!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake (0:39)
    • Release the clips and open the air filter housing box
    • List the air filter housing box cover up and off
    • Release the PCV hose
    • Loosen the rear clamp on the inlet pipe
    • Remove the box cover and pipe
    • Lift the bottom of the air filter housing box up and out
    • Remove the 10mm bolt behind the alternator
    • Remove the 10mm bolt behind the oil cap
    • Lift the air box up
    • Disconnect the intake sensor
    • Remove the air box
  2. step : Removing the EGR Tube (2:00)
    • Find the EGR valve located on the front of the cylinder head on the cylinder head below the alternator
    • Spray rust penetrant on the two 8mm bolts connecting the EGR tube to the EGR valve
    • Remove the two 8mm bolts
    • Disconnect the clip from the other end of the tube at the intake manifold
    • Remove the EGR tube
  3. step : Installing the EGR Tube (3:10)
    • Insert the EGR tube into the intake manifold
    • Secure the EGR tube into place with the clip
    • Tighten the 8mm bolts to the EGR tube
    • Torque the bolts to 20 foot-pounds
  4. step : Reinstalling the Air Intake (3:52)
    • Insert the air box with the silicone gasket over the throttle body
    • Tighten the two 10mm bolts to the box
    • Connect the air temp sensor
    • Insert the air filter housing into its mounting spots
    • Insert the intake tube to the air box
    • Tighten the hose clamp
    • Connect the PCV hose
    • Lock the air filter housing box

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen EGR Tube V8 5.7L Dorman 598-302
2006-2008Dodge Durango Dodge Durango EGR Tube V8 5.7L Dorman 598-302
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck EGR Tube V8 5.7L Dorman 598-302
Only 1 left in stock
Part #: 1AEGT00023

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 598-302

How-to Video:

(05:16 min)