This replacement egr tube or pipe is just what you need to get your emissions in good working order again! Anyone who has tried to work with an older EGR tube knows the problems that come when trying to replace them!

Over time from the hot and cold cycles of the engine and corrosive exhaust gases running through the egr tube, will cause the egr pipe to rust so badly that the tube will crumble in your hands if you try to move it. Also, many times when the EGR valve is replaced, these tubes are either frozen to the valve or the exhaust manifold making it impossible to remove them without twisting and breaking them off.

Now you have a great alternative to the dealer for replacing those damaged, rotted, or rusted out EGR tubes with a brand new tube. If your check engine light is coming on due to a bad EGR system and you know your EGR tube is the problem, you now have the solution!!

EGR Tube Specifications:

  • Replaces one of many dealer part numbers including: 10220275
  • Brand new, not rebuilt or remanufactured
  • Bolts between exhaust manifold and EGR Valve
  • Built to strict quality control standards
  • Helps Restore proper emissions
  • Direct replacement for the following engines as listed:
    • V8 5.0L (8th Vin Digit M)
    • V8 5.7L (8th Vin Digit R)

Note: To ensure fit please match the 8th digit of your VIN number to the VIN code in the title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Thermostat Hose (1:59)
    • Have a drain pan ready
    • Use a set of lock off pliers to clamp the thermostat hose
    • Slide back the hose clamp
    • Disconnect the hose
  2. step : Removing the Oil Filler Neck (3:05)
    • Loosen and remove the fitting from the EGR tube with a 22mm wrench
    • Grab the base of the oil fill neck
    • Rotate the neck counterclockwise
    • Remove the neck from the engine
    • Disconnect the breather hose
  3. step : Removing the EGR Tube (3:32)
    • Remove the 15mm bolt on the hold down bracket on the back of the intake manifold
    • Loosen the 1 inch nut on the tube
    • Remove the EGR tube
  4. step : Installing the EGR Tube (4:45)
    • Reinstall the EGR tube
    • Tighten the EGR tube with a 22mm wrench
    • Tighten the 1 inch nut with a 25mm wrench
  5. step : Installing the Oil Filler Neck (5:44)
    • Reinstall the oil filler neck
    • Reinstall the 13mm hold down bolt to the EGR tube
  6. step : Installing the Thermostat Hose (6:18)
    • Reinstall the thermostat hose
    • Close the hose clamp
    • Loosen the locking pliers
    • Refill the coolant

Tools needed for replacement:

    General Tools

  • Drain Pan

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 15mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 24mm Wrench
  • 22mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Cadillac Escalade EGR Tube Dorman 598-200
  • 1996-2000 Chevy C1500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy C1500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-1999 Chevy C2500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 Chevy C2500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-2000 Chevy C3500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy K1500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 Chevy K1500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-2000 Chevy K2500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy K2500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 Chevy K3500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy Suburban C1500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy Suburban C2500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy Suburban K1500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 Chevy Suburban K2500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-2000 Chevy Tahoe EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-2000 GMC C1500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC C1500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 GMC C2500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC C2500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 GMC C3500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-2000 GMC K1500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC K1500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 GMC K2500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC K2500 Truck EGR Tube V8 5.0L (8th Vin Digit M) Dorman 598-200
  • 1996-2000 GMC K3500 Truck EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC Suburban C1500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC Suburban C2500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC Suburban K1500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC Suburban K2500 EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200
  • 1996-1999 GMC Yukon EGR Tube V8 5.7L (8th Vin Digit R) Dorman 598-200

This part replaces:

  • OE # 10220275
  • Dorman 598-200
Part #: 1AEGT00014

Ships Same Day for orders placed by 4 P.M. ET

Dorman
Brand #: 598-200

How-to Video:

(06:51 min)