Part Details

  • Includes: Bracket
  • Side Location: Passenger Side
  • Front or Rear Location: Front

This is a power door lock actuator that mounts inside the door. It is designed to REPLACE a broken or missing unit.

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Door Lock Actuator with Bracket
  • Replaces dealer part numbers: E9OY-54218-A42AA, F3DZ-54218-A42AA, F8AZ-54218-A42AA, E9OY54218A42AA, F3DZ54218A42AA, F8AZ54218A42AA
  • Electrically operated, not vacuum
  • Correct electrical connection
  • Anodized steel housing resists corrosion

This power door lock actuator is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel (1:10)
    • Unscrew a few screws and use a putty knife to release the clips.
    • Watch our door panel and replacement videos to learn more.
  2. step : Remove window track (1:43)
    • Use a hammer and punch to knock out the center of the bolt, and use a drill to remove it.
    • Remove the 11 mm bolt.
    • Disconnect the wire connected to the track, taking care not to pull it too hard.
    • Set the track aside in the bottom of the door frame.
  3. step : \Remove harness clip (2:45)
    • Remove the harness clip holding the actuator in place with a good pull.
  4. step : Disconnect harness from the actuator (2:58)
    • Use a small screwdriver to pry the tab away and disconnect the harness from the actuator.
  5. step : Prepare new lock actuator (3:55)
    • Put the correct hook on the lock actuator.
    • Put the first O ring on.
    • Slide the farrell on, working 1 tooth over the collar of the hook and the second tooth will go over fairly easily.
    • Slide the second O ring on.
    • Use a little grease to help.
    • Pry the bracket off the old one and push the rivet out.
    • Put the bracket on the new actuator.
    • Secure the bolt with the little nut to help secure it while you snap the bracket back on.
  6. step : Install actuator (5:47)
    • Fit the new actuator into the locking mechanism.
    • Screw those three screws back on with your #3 screwdriver to secure the locking mechanism.
    • Reach in and replace the bolt. Put your harness back in and reclip it.
  7. step : Re-assemble the window track (7:34)
    • Position it back up in line with the bottom of the window.
    • Secure it in place with the bolt.
    • Re-secure the wire connected to the track.
  8. step : Re-assemble the door panel. (8:26)
    • For more information check out our door panel video.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit
  • Drill

  • General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 11mm Wrench

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Door lock actuator
Im very satisfied with the door lock actuator thanks for your help.
March 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-2003Ford Crown Victoria Ford Crown Victoria Front Door Lock Actuator with Bracket Passenger Side
1991-1999Ford Explorer Ford Explorer 4 Door Front Door Lock Actuator with Bracket Passenger Side
2001-2003Ford Explorer Sport Trac Ford Explorer Sport Trac Front Door Lock Actuator with Bracket Passenger Side
1989Ford Taurus Ford Taurus (Built After 10/89 Production Date) Front Door Lock Actuator with Bracket Passenger Side
1990-1995Ford Taurus Ford Taurus Front Door Lock Actuator with Bracket Passenger Side
1988-1994Lincoln Continental Lincoln Continental Front Door Lock Actuator with Bracket Passenger Side
1992-2003Mercury Grand Marquis Mercury Grand Marquis Front Door Lock Actuator with Bracket Passenger Side
1997-2001Mercury Mountaineer Mercury Mountaineer Front Door Lock Actuator with Bracket Passenger Side
1990-1995Mercury Sable Mercury Sable Front Door Lock Actuator with Bracket Passenger Side

This part replaces:

  • Standard Motor Products DLA-25
  • OE # F3DZ
  • OE # E9OY
  • OE # F8AZ54218A42AA
Part #: 1ADLA00108


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:22 min)