Specifications:

  • Protects your truck bed from snow, salt, leaves and more
  • Heavy duty vinyl withstands all types of weather
  • Hidden industrial-grade nylon snaps for a clean look
  • CNC designed for a perfect fit
  • Clamp on, no drill installation
  • Instructions included
  • Correct for 6-1/2' Bed ONLY

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Installing the Tonneau Cover Frame (2:21)
    • Slide the corner fixtures into the front rail
    • Tighten the Phillips screws that attach the corner fixtures to the front rail
    • Place the front rail behind the truck windshield
    • Slide the side rails onto the front rail
    • Tighten the thumbscrews that attach the side rails to the front rail
    • Slide the corner fixtures into the rear rail
    • Tighten the Phillips screws that attach the corner fixtures to the rear rail
    • Slide the side rails onto the rear rail
    • Tighten the thumbscrews that attach the side rails to the rear rail
    • Line up the frame with the truck bed
    • Place one clamp to hold the tonneau cover frame to the bed frame
    • Tighten the clamp screw with an Allen wrench
    • Place the other three clamps
    • Tighten the three clamp screws with the Allen wrench
    • Place one clamp on the center of one side rail, avoiding the side rail notch
    • Tighten the clamp screw with the Allen wrench
  2. step : Installing the Cross Braces (4:45)
    • Set one cross brace into one notch
    • Slide the cross brace into the notch on the opposite side
    • Repeat these steps for the second cross brace
    • Place one clamp on the center of the remaining side rail
    • Tighten the clamp screw with the Allen wrench
  3. step : Installing the Tonneau Cover (5:05)
    • Allow the tonneau cover strap to rest in the truck bed
    • Snap in one front corner of the tonneau cover
    • Lay the cover across the frame
    • Snap in the other front corner
    • Pull the cover tight
    • Snap the two rear corners on
    • Push in the remaining snaps
    • Close the tailgate

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Does cover work with over rail bed liner?
Anthony A on Jul 28, 2017
BEST ANSWER: If you have any extension in the side rails, or what blocks the openings this would be more difficult to install. Our design uses the side rails as a mounting/clamping position.
Will this fit a 2004 dodge ram 1500 single cab with a 6 and 7.5 inch tail bed?
Corey C on Dec 8, 2016
BEST ANSWER: It will fit the trucks below.
VEHICLE FIT
2002-2008 Dodge Ram 1500 Truck with 6-1/2 Foot Bed Hidden Snap Tonneau Cover
2003-2009 Dodge Ram 2500 Truck with 6-1/2 Foot Bed Hidden Snap Tonneau Cover
2003-2009 Dodge Ram 3500 Truck with 6-1/2 Foot Bed Hidden Snap Tonneau Cover

If you are unsure of the bed size you can call the dealer or us. We may be able to run the VIN and get that information too.

Vehicle Fit

  • 2002-2008 Dodge Ram 1500 Truck with 6.5 Foot Bed Hidden Snap Tonneau Cover
  • 2003-2009 Dodge Ram 2500 Truck with 6.5 Foot Bed Hidden Snap Tonneau Cover
  • 2003-2009 Dodge Ram 3500 Truck with 6.5 Foot Bed Hidden Snap Tonneau Cover
Part #: 1AXTT00038


How-to Video:

(06:57 min)