Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2002-06 Dodge Ram 1500
How to Replace Tail Lights 2002-2008 Dodge Ram 1500
How to Replace Performance Tail Light 2002-2008 Dodge Ram 1500
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
T25 Torx Driver
1. Removing the Taillight Assembly
Remove the two T25 screws.
Pull the taillight assembly out.
Remove the locking tab on the harness.
Disconnect the harness.
2. Changing a Bulb
Remove the four Phillips screws on the connector panel.
Pull the bulb straight out.
Push a new bulb into place.
Replace the connector plate.
Replace the four screws.
3. Replacing the Taillight Assembly
Connect the Harness.
Push the locking tab into place.
Line up the taillight and press it into place.
Replace the two T25 screws.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to remove and replace your tail light assembly. We'll show you both replacing the tail light assembly as well as if you just need to change a bulb, the procedure for that. This is pretty much the same for any 2002 to 2006 Ram. Tools you'll need are a T25 torx driver, a flat blade screwdriver, and a Phillips screwdriver if you are replacing a bulb.
Okay, first, you want to remove the tail light. T25 torx bit, there's two screws, one here and one down here. As soon as I pull that one out the light starts moving. Then you pull over here with this hand on the edge, and basically two pins here that lock into holes there. You need a flat blade screwdriver. There's a locking tab here, just push it down and out and then push on the tab here and remove that harness. If you're just looking to change the bulbs, undo four Phillips screws. Okay, we'll fast-forward through removing those four screws.
And this connector plate comes out. The bulbs just detach like that. Okay, and again we'll fast-forward as we just put those four screws back into place and tighten them down nice and snug. So now a new light from 1A Auto. Exactly the same. If you've broken your taillight it's a perfect fix, goes right in. Comes in. Locking tab. Pushes right into place. Start one screw, start the other screw. Nice and snug, they don't have to be extremely tight. You're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Gloves
T15 Torx Driver
Phillips Head Screwdriver
Safety Glasses
Tools used
Gloves
T15 Torx Driver
Phillips Head Screwdriver
Safety Glasses
CS172-B000R
In Stock
Product Reviews
Loading reviews
4.33/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
1
Extremely Satisfied!
Gilberto
February 19, 2016
This is my first purchase from 1A Auto and I couldn't be happier. The tail light is awesome! The build quality is way better than I expected. The circuit board works and the lens matches my factory tail light from the driver side.
TAIL LIGHT ASSEMBLY FOR 2002 DODGE TRUCK
David
January 26, 2017
I would HIGHLY recommend A1 for all my truck orders. Fantastic product with even better communication. THIS IS WHAT CUSTOMER SERVICE IS ALL ABOUT.
THANKS SO MUCH.
Dave Bruce
Wrightwood Ca.
Rudy
September 21, 2019
The tail light was made of quality material. And looks as good or better than the factory one.??
Very Satisfied
1AA Auto did well but the part just doesn't fit right
Penny
January 2, 2020
Ordered passenger side tail light for my Dodge pickup truck and it just doesn't conform to the shape of the bed it's supposed to fit in. When you put it in the clips on the one side if you try to screw down the light on the other side it just pops out of the clips because it's not shaped like the bed of the truck.
Perfect match
L
February 12, 2020
This tail light is a perfect match for my truck at a get at price.
New taillight fixture
DAVID
February 8, 2023
good product, looks exactly like the original, even came with bulb holder and bulbs
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.