Replaces

Dodge Seat Cushion Bottom Mopar 5180021AA - MPISU00001

Specifications:

  • Brand New Mopar Seat Bottom Cushion
  • Fits LH (Driver Side) Front Bucket Seat
  • Original equipment part
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (0:38)
    • Disconnect the negative terminal with a 10mm wrench
    • Let the vehicle sit for 30 minutes to let the airbag modules power down
  2. step : Removing the Seats (0:57)
    • Undo the two 15mm bolts at the front of the seat brackets
    • Remove the two 15mm bolts at the back of the rail
    • Spray the underside of the vehicle where the bolts are with rust penetrant if needed
    • Remove the seat belt cover
    • Remove the T45 Torx bolt from the seatbelt
    • Pull the seat back and buckle in the seat with the rear seat belt
    • Disconnect the electrical connector under the driver's seat
    • Disconnect the red safety tab from the wiring harness
    • Remove the four 13mm nuts holding the seat together
    • Remove the center seat
    • Remove the driver and passenger seats
  3. step : Removing the Seat Cushion (3:22)
    • Remove the four #2 Phillips screws from the seat
    • Remove the manual handle
    • Remove the three #2 Phillips screws from the other side
    • Pull out on the back cover and pry it off
    • Disconnect the switch wiring harness
    • Remove the three Phillips head screws
    • Remove the side cover
    • Unhook the plastic covers from the seat
    • Release the clips from the sides
    • Remove the seat cover and cushion
    • Disconnect the electrical connector and Velcro
    • Pull the seat up and out
    • Work the cover off of the cushion
  4. step : Installing the Seat Cushion (6:20)
    • Insert the seat cushion into the seat cover
    • Place the Velcro strap across the seat
    • Insert the seat cushion into place
    • Pull the heating pad harness through
    • Clip in the seat cushion
    • Connect the wiring harnesses
    • Insert the side cover wiring harness
    • Insert the side cover into place
    • Tighten the four #2 Phillips screws to the seat
    • Place the other panel into its position
    • Tighten the three #2 Phillips screws on the other side
  5. step : Installing the Seats (3:58)
    • Insert the seats into place
    • Leave them laid back
    • Tighten the 13mm bolts the center console onto the passenger seat
    • Clip the wiring harness into place
    • Connect the wiring harness
    • Lay the seats back down and align the bolt holes up
    • Tighten the 15mm bolts to the front of the seat
    • Tighten the 15mm bolts to the back of the seat
    • Torque the seat bolts to 30 foot-pounds
    • Insert the seatbelt tab into place
    • Tighten the T45 bolt into the seat belt
    • Torque the bolt to 29 foot-pounds
    • Press in the seatbelt cover
  6. step : Connecting the Battery (6:54)
    • Tighten the 10mm negative battery terminal

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Bent Nose Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • No. 3 Phillips Screwdriver
  • Flat Blade Screwdriver
  • No. 2 Phillips Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket
  • 13mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2008 Dodge Ram 1500 Truck Front Seat Cushion Bottom Upgrade for Models with Vinyl Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA
  • 2006-2008 Dodge Ram 1500 Truck Front Seat Cushion Bottom Upgrade for Models with Cloth Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA
  • 2006-2009 Dodge Ram 2500 Truck Front Seat Cushion Bottom Upgrade for Models with Vinyl Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA
  • 2006-2009 Dodge Ram 2500 Truck Front Seat Cushion Bottom Upgrade for Models with Cloth Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA
  • 2006-2009 Dodge Ram 3500 Truck Front Seat Cushion Bottom Upgrade for Models with Cloth Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA
  • 2006-2009 Dodge Ram 3500 Truck Front Seat Cushion Bottom Upgrade for Models with Vinyl Seats Driver Side (excluding Occupant Classification System) Mopar 5180021AA

This part replaces:

  • Mopar 5180021AA
  • OE # 5180021AA
Part #: MPISU00001

Out of Stock

Brand #: 5180021AA

How-to Video:

(12:21 min)