Replaces

Dodge Ram 2500 Truck Wheel Bearing & Hub Assembly Front TRQ BHA53949 - 1ASHF00083

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing
  • Front or Rear Location: Front

This replacement front hub and bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 4 Bolt Flange
  • Fits 8 Lug Wheel
  • Replaces dealer part number: 5010020AA
  • Direct replacement
  • Built to strict quality control standards
  • Fits 2500 Models with 4WD (Four Wheel Drive)
  • Fits models with Dana 60 Axle
    • Does NOT fit trucks with Dana 44 front axle assemblies*

*To determine which front axle assembly your truck came from the factory with, it will either be listed on a sticker affixed to the LF front door jam, outer edge of LF door, or the underside of the hood

NOTE: In order to remove the old hub from the rotor assembly, the 8 studs need to be pressed out. Once the studs are removed, the hub and rotor will come apart. To install the new hub, place the hub and rotor together, and then reinstall old the wheel studs.

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
8800 lb GVWR?
Ricardo A on Jan 25, 2018
BEST ANSWER: That is an acronym for Gross Vehicle Weight Rating. This info can be found on a number of labels on the vehicle or by contacting your local dealer with your VIN. Thank you!

Vehicle Fit

Year Make Model Description
1994-1997Dodge Ram 2500 Truck Dodge Ram 2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Dana 60 Axle (excluding 4 Wheel ABS Brakes) TRQ
1998-1999Dodge Ram 2500 Truck Dodge Ram 2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly (excluding 4 Wheel ABS Brakes) TRQ

This part replaces:

  • Hollander 538-01447
  • TRQ BHA53949
  • OE # 5010020AA
Part #: 1ASHF00083


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53949