Replaces

Dodge Ram 1500 Truck Brake & Wheel Bearing Kit Front - 1ABMS00036

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Includes shims
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fit 5 Stud Wheels
  • 13.2" (336mm) Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Fits 5 Lug Wheels
  • Replaces dealer part numbers: 52070321AA, 52070321AB
  • Studs already installed
  • Do NOT fit the LH (Driver Side) on models that use a Speed Sensor
  • Fit models with RWAL (Rear Wheel Anti-Lock Brakes) only
    • Do NOT fit models with 4 Wheel ABS
NOTE: 2004-07 Ram 1500 V8 5.7L Models: The speed sensor is only on the LH (Driver Side) wheel bearing. Please verify there is no speed sensor on the LH (Driver Side) bearing before ordering.

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(13:39 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket




Vehicle Fit

  • 2006-2007 Dodge Ram 1500 Truck Regular Cab Front Ceramic Brake & Wheel Bearing Kit V6 3.7L with Rear Wheel ABS Brakes
  • 2006-2007 Dodge Ram 1500 Truck Regular Cab Front Ceramic Brake & Wheel Bearing Kit V8 5.7L with Rear Wheel ABS Brakes without Speed Sensor
  • 2006-2007 Dodge Ram 1500 Truck Regular Cab Front Ceramic Brake & Wheel Bearing Kit V8 4.7L with Rear Wheel ABS Brakes
  • 2006-2007 Dodge Ram 1500 Truck Quad Cab Front Ceramic Brake & Wheel Bearing Kit V6 3.7L with Rear Wheel ABS Brakes
  • 2006-2007 Dodge Ram 1500 Truck Quad Cab Front Ceramic Brake & Wheel Bearing Kit V8 4.7L with Rear Wheel ABS Brakes
  • 2006-2007 Dodge Ram 1500 Truck Quad Cab Front Ceramic Brake & Wheel Bearing Kit V8 5.7L with Rear Wheel ABS Brakes without Speed Sensor
  • 2008 Dodge Ram 1500 Truck Regular Cab Front Ceramic Brake & Wheel Bearing Kit for Models with Rear Wheel ABS Brakes without Speed Sensor
  • 2008 Dodge Ram 1500 Truck Quad Cab Front Ceramic Brake & Wheel Bearing Kit for Models with Rear Wheel ABS Brakes without Speed Sensor
Part #: 1ABMS00036

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More