Replaces

Dodge Ram 1500 Truck Brake & Wheel Bearing Kit Front - 1ABMS00034

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Includes shims
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fit 5 Stud Wheels
  • 13.2" (336mm) Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Fits 5 Lug Wheels
  • Replaces dealer part numbers: 52070321AA, 52070321AB
  • Studs already installed
  • Do NOT fit the LH (Driver Side) on models that use a Speed Sensor
  • Fit models with RWAL (Rear Wheel Anti-Lock Brakes) only
    • Do NOT fit models with 4 Wheel ABS
NOTE: The speed sensor is only on the LH (Driver Side) wheel bearing. Please verify there is no speed sensor on the LH (Driver Side) bearing before ordering.

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 13.19" (335mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Kit Includes: (2) Front Hub Assemblies
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Brake Pad Features & Benefits: Thermal Scorched
  • Wheel Bearing & Hub Assembly Features & Benefits: Direct Fit Replacement
  • Wheel Bearing & Hub Assembly Features & Benefits: Precision Engineered
  • Wheel Bearing & Hub Assembly Features & Benefits: Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake & Wheel Bearing Kit for Models with Rear Wheel ABS Brakes Ceramic
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake & Wheel Bearing Kit V8 4.7L with Rear Wheel ABS Brakes Ceramic
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake & Wheel Bearing Kit V8 5.7L with Rear Wheel ABS Brakes without Speed Sensor Ceramic
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake & Wheel Bearing Kit V6 3.7L with Rear Wheel ABS Brakes Ceramic
Part #: 1ABMS00034


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:39 min)