Specifications:

  • Direct replacement
  • Plastic tanks with aluminum core
  • Dimensions:
    • Height: 24"
    • Width: 18-7/8"
    • Depth: 1-9/16"
  • Built to strict quality control standards

 

Packaging:

Radiators may incur bent cooling fins or small imperfections during shipping or manufacturing. A few bent fins or small dents and scratches do not affect the fit or the function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these types of insignificant damages.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Draining the Coolant (0:39)
    • Open the radiator drain
    • Drain a bit of fluid out
    • Close the valve
  2. step : Removing the Radiator Fan (1:02)
    • Insert a pipe wrench to the radiator fan nut
    • Insert a 3/8 drive ratchet into the tensioner
    • Tap the pipe wrench with a hammer to knock the nut loose
    • Loosen the radiator fan nut off with an adjustable wrench
    • Remove the radiator fan
  3. step : Removing the Coolant Reservoir (1:45)
    • Remove the hose from the bottom of your washer pump
    • Drain the coolant fluid
    • Disconnect the water pump connector
    • Disconnect the coolant level sensor
    • Remove the overflow hose from the fill neck on the radiator
    • Remove the two 10mm bolts from the coolant bottle
    • Lift the reservoir up and out
  4. step : Removing the Radiator Fan Shroud (2:39)
    • Remove the 13mm bolt under the fill neck on the radiator
    • Loosen the upper radiator hose clamp at the radiator
    • Twist and free the radiator hose up and off
    • Remove the 13mm bolt on the fan shroud
    • Lift the fan shroud up and out
  5. step : Removing the Radiator (3:30)
    • Loosen the radiator hose clamp with a flat blade screwdriver
    • Twist the radiator hose to break it free
    • Remove the two 10mm bolts from the upper radiator mounts
    • Let the power steering cooler hang
    • Remove the 10mm bolt behind the radiator below the neck filler, above the radiator hose
    • Lift the radiator up and to the side
    • Remove the 10mm tranny bracket bolt
    • Release the transmission cooler lines from the radiator bracket
    • Lift the radiator up and out
  6. step : Installing the Radiator (5:10)
    • Close the drain on the bottom of the radiator
    • Insert the radiator into place
    • Insert the transmission cooler tabs into place
    • Snap the cooling lines into the retainer
    • Tighten the 10mm tranny bracket bolt
    • Place the power steering cooler into place
    • Hook the radiator onto the lower brace
    • Line the transmission cooler brackets up
    • Hand tighten the transmission cooler nuts
    • Hold the bolt with a wrench and tighten the 10mm nut
    • Reinstall the two 10mm bolts to the upper radiator mounts
  7. step : Installing the Radiator Fan Shroud (7:35)
    • Insert the radiator fan shroud into place
    • Insert the two 13mm bolts at the top of the fan shroud
  8. step : Reinstalling the Radiator Fan (7:57)
    • Insert the radiator fan into place
    • Start the nut by hand
    • Spin the nut into place
    • Tighten the pipe wrench to the radiator fan nut
    • Hammer the radiator fan nut into place
  9. step : Reinstalling the Coolant Reservoir (8:34)
    • Insert the coolant reservoir into place
    • Tighten the two 10mm bolts to the top of the tank
    • Insert the overflow tube into place
    • Reconnect the water pump connector
    • Reconnect the coolant level sensor
    • Reconnect the upper radiator hose
    • Tighten the upper radiator hose clamp into place
    • Reconnect the lower radiator hose
    • Tighten the lower radiator hose clamp into place
  10. step : Refilling the Coolant (5:30)
    • Refill the washer fluid
    • Remove the radiator cap by pressing down counterclockwise
    • Refill with 50/50 coolant

Tools needed for replacement:

    General Tools

  • Hammer
  • Drain Pan

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 3/8 Inch Drive Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket

4.9 / 5.0
16 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
14
2
0
0
0
Dodge Ram 2500
Radiator fit perfectly. Price was right. Shipping handling was as expected. Good deal.
July 12, 2017
Purchased
7 months ago
2005 Dodge Ram 1500 - Radiator replacement
Saw the same radiator at my local auto parts store for twice as much as I paid for this one, price is 5 star.
Unit shipped the same day, I ordered it on a Thursday and it got here on Monday (no Sat Delivery, that cost more than the part).
When the part got here, the box looked good, the radiator was sealed with caps and came with mounting hardware. I've never changed a radiator, but I am mechanically inclined; I watched their installation video and it was spot on and very helpful. I also read other reviews from customers that have purchased this particular radiator for a Dodge Ram, someone mentioned that it was "unnecessary to remove the fan before you remove the fan shroud" - so I thought, great, I'll save time and I don't have a wrench big enough to take the fan off anyway. I found out that you cannot remove the fan shroud with the fan mounted - my workaround was taking the 4 bolts off the back of the fan clutch to remove the fan as those bolts are much smaller, this was fairly easy. When I got the radiator out, I put it next to the new one to compare and dang this thing is EXACTLY the same. I made my only other mistake right here, I assumed the hardware they provide (threaded clips) to mount the radiator were the same size as the bolts I have on my truck and they were not. My truck was hit in the front a couple years ago and maybe the auto body shop put a different size clip on there, not a big deal, I just took the existing clips off of the old radiator and put them on the new. Other than that, the radiator looks good and performs well, my temp gauge seems to be running a little cooler, so that's another plus. It was actually a pretty easy job and self-explanatory for the most part (if you have common sense); I would have been pissed if I had paid someone upwards of $500 to do this simple replacement for me, got it all done for less than $150 with anti-freeze and 2 hours of my time (if I did it again right now, it would only take me an hour). Do it yourself, you'll be glad you did...

Note: My radiator blew up because my serpentine belt shredded. I was hoping it was the belt only, so I replaced it and it's a pain in the butt to do with everything in tact. Later, I noticed how easy it would be with the fan shroud, fan and hoses out of the way, wished I waited until that moment to change the belt too! Maybe that might help at least one person...
October 12, 2017
Purchased
4 months ago
great value
radiator fit well and came w/ new rubber mounts and nut clips
July 21, 2017
Purchased
7 months ago
RAM 2008 RADIATOR REPLACEMENT
PERFECT FIT AND WORKING WELL AFTER SEVERAL MONTHS. USED JB WELD AS A TEMPORARY PATCH ON OLD RADIATOR UNTIL I RECIEVED REPLACEMENT. VERY HAPPY WITH PRODUCT TO DATE.
February 14, 2017
Purchased
1 year ago
Great help!
This made the job go quick and easy Thankful for the video
July 9, 2017
Purchased
7 months ago
Great Value
Was a little skeptical about purchasing this online because the price was almost $100 cheaper than local auto chain stores. Quick delivery, no problems installing it myself, and is running fine. It blows me away that it was less than half the price I would have paid buying it locally. I have this company bookmarked for future needs.
February 5, 2018
Purchased
4 weeks ago
2005 dodge hemi
received the radiator within four days. installation took about 2 hours. the product was the exact same as the oem that was removed. also the video was very helpful.
January 24, 2018
Purchased
1 month ago
Great buy!
This was a perfect fit and works great! The installation video was also helpful. I would recommend this radiator if you need a replacement. It was about half the cost of what they wanted at the local auto parts store. Fast delivery!
February 9, 2018
Purchased
3 weeks ago
Perfect Fit
The radiator was a perfect fit and easy to install. The installation video helped but you don't need to remove the fan. There is plenty of room once the fan shroud is disconnected.
September 24, 2017
Purchased
5 months ago
Fast delivery and the correct parts
Everything fit just like the OEM-equipment will buy from 1a-Auto again....Very pleased with the parts!!!
August 30, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What is the brand of this radiator?
SETH M on Aug 5, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

How-to Video:

(10:58 min)

Tools List:

    General Tools

  • Hammer
  • Drain Pan

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 3/8 Inch Drive Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket



This part replaces:

  • Hollander 675-00125, 02719B
  • OE # 55056682AB, 55056682AE
  • Spectra Premium Industries CU2813
  • Partslink CH3010302
  • TYC 2813

Vehicle Fit

  • 2004-2008 Dodge Ram 1500 Truck Radiator V8 5.7L
  • 2004-2009 Dodge Ram 2500 Truck Radiator V8 5.7L
  • 2004-2009 Dodge Ram 3500 Truck Radiator V8 5.7L
Part #: 1ARAD00878

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More