Replaces

Dodge Plymouth Driver or Passenger Side Exhaust Manifold DIY Solutions

Description
Vehicle Fit
Warranty & Shipping
Q&A

Our aftermarket manifolds are some of the highest quality replacements on the market!

If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This cast iron manifold has been designed to eliminate the faults of the original Dodge design. Designed for use with non emissions vehicles.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side)
  • Replaces dealer part numbers: 3769103, 9769109
  • 2 Bolt Flange
  • Center dump design
  • Direct replacement
  • Corrosion resistant
  • Replaces original manifolds that are cracked from thermal expansion and contraction
  • Strengthened and redesigned in the vulnerable areas of failure
  • Does NOT have a heat riser

Now you can buy a high quality exhaust manifold for less than 1/2 the price of the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this have a heat riser built in or is it even required? The passenger side does
Patrick P April 8, 2016
Mine did not have heat riser. Eng was built w/out one. dodge 440-3.
Robert B April 9, 2016
No, I bought the gaskets that are high that cover the valve cover
Raul C April 9, 2016
NO heat riser...check the quality of the casting mine had a pin hole in it and had to clearance a bolt hole to get it installed.
Eric W April 10, 2016
No heat riser on this part
Brian F April 11, 2016
Does it fit a south wind rv 1987
Jason D July 11, 2016
In my case (2006 Winnebago Voyage with 8.1L engine) the length of the new manifolds tail stock was longer than the original, making it very difficult to mate up with the exhaust pipe (impossible without modifying the exhaust pipe). Plus the type of gasket used on the new manifold was different than the original (flat washer-type gasket on new; recessed doughnut-type on original). So make sure you check out both aspects before you move forward. Otherwise, the new manifold was just a good a quality as the original. And as far as a heat riser, just block it off it its not needed.
I N October 6, 2017
No heat riser nor is one required on this part. This part was designed for a beveled donut style gasket.
J P September 30, 2018
It fit the drivers side of my 1977 Dodge RV but on the passengers side. It did not have a heat riser.
James A February 14, 2019
No
E D May 15, 2019
Does this fit on a 73 Dodge w200 with a 318 V8?
Daniel B May 19, 2019
This manifold will only fit the 400ci and 440ci,
Corey M May 20, 2019

Fits the following Makes:

Year Make Model Description
1972-1978Dodge D200 Truck Dodge D200 Truck 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge D200 Truck Dodge D200 Truck 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge D300 Truck Dodge D300 Truck 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge D300 Truck Dodge D300 Truck 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge Motorhome M300/600 Dodge Motorhome M300/600 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge Motorhome M300/600 Dodge Motorhome M300/600 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1974Dodge Ramcharger Dodge Ramcharger 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1974-1978Dodge Ramcharger Dodge Ramcharger 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1976-1978Dodge Ramcharger Dodge Ramcharger 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1976Dodge Van - Full Size Dodge Van 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W100 Truck Dodge W100 Truck 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W100 Truck Dodge W100 Truck 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W200 Truck Dodge W200 Truck 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W200 Truck Dodge W200 Truck 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W300 Truck Dodge W300 Truck 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1972-1978Dodge W300 Truck Dodge W300 Truck 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1974-1978Plymouth Trailduster Plymouth Trailduster 440ci V8 7.2L Driver or Passenger Side Exhaust Manifold
1974Plymouth Trailduster Plymouth Trailduster 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold
1976-1978Plymouth Trailduster Plymouth Trailduster 400ci V8 6.6L Driver or Passenger Side Exhaust Manifold

Part Interchange

Brand Label Part Number
DIY Solutions EXH00269

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1AEEM00081
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: EXH00269