Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:40)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock (0:59)
    • Secure the vehicle on jack stands
    • Hold the 15mm bolt with a 15mm wrench from the bottom of the shock
    • Remove the 18mm bolt from the bottom of the shock
    • Jack up underneath the wheel knuckle to push in the shock
    • Remove the 15mm bolt
  3. step : Installing the New Shock (1:52)
    • Place the 15mm bolt on the top of the shock and tighten it
    • Align the lower part of the shock
    • Insert and tighten the 15mm bolt and 18mm nut
    • Torque the bolts to 75 foot-pounds
  4. step : Reattaching the Wheel (2:44)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 15mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2011 Dodge Nitro Rear Shock Absorber Driver or Passenger Side
  • 2002-2012 Jeep Liberty Rear Shock Absorber Driver or Passenger Side

This part replaces:

  • Monroe 37203
  • KYB 344404
Part #: 1ASHA00135

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:34 min)