Replaces

Dodge Neon Plymouth Neon Brake Kit Nakamoto MD730, 5397-DSZ - 1APBS00489

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • 5 wheel stud holes

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:13)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 10 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and pry off the caliper.
    • Remove the rotor.
  3. step : Install the new disc brakes (4:01)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 10 mm socket.
    • Torque the 10 mm bolts to 25 ft lbs.
  4. step : Mount the wheel (7:44)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good product very happy with my order good quality
July 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2002 Dodge Neon (excluding RT) Rear Disc Brakes Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2003-2005 Dodge Neon (excluding RT) (excluding SRT-4) Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2000-2001 Plymouth Neon Rear Disc Brakes Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD730, 5397-DSZ
Part #: 1APBS00489

Out of Stock

Nakamoto
Brand #: MD730, 5397-DSZ

How-to Video:

(08:52 min)