• Brand New Towing Mirrors
  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Power operation upper glass
  • Heated glass
  • Turn signal - Upgradeable
    • Housing mounted LED lights
    • Includes turn signal installation manual
  • Flip-up design
    • Patented mirror head design folds out for wider vision
    • Flip-up design mirror was not available from the OE manufacturer for this model year
  • Textured black finish injection molded plastic housing

Installation Note: Use caution when installing mirror not to pinch wires near mounting area. Pinched wires can result in shorting.

Upgraded Mirrors Note:

  • This set of upgraded mirrors are designed to fit and function just like the original. However, if the vehicle did not come equipped with all of the features noted, additional wiring may be required for complete operation.

Trusted Quality

  • Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck and back them with the best warranty in the automotive industry. They are manufactured from the highest quality materials and are constructed to meet or exceed OEM standards. Every Trail Ridge truck part is rigorously tested to ensure superior fit, function, and durability. Quality, trusted value, and hassle-free installation are all backed by our 100% satisfaction guarantee.

Part Details

  • Quantity: Pair
  • Mirror Extension Type: Flip-Up
  • Mirror Signal Type: LED Turn Signal
  • Mirror Type: Towing
  • Mirror Heating Type: Heated
  • Mirror Operation: Power
  • Mirror Color / Finish: Textured Black
  • Mirror Folding Type: Manual-Folding

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Installation Instructions

  1. step : Removing the Door Panel (1:02)
    • Remove the T40 Torx screw in behind the door handle. And remove the door handle.
    • Remove the four Phillips screws in the door panel.
    • Pry up the switch panel.
    • Disconnect the harnesses.
    • Lift the door panel up and off.
  2. step : Removing the Side Mirror (2:39)
    • Pull off the insulation.
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts.
    • Push the tabs on the connector in.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (3:29)
    • Line up the mirror and push it into place.
    • Replace the three nuts.
    • Reconnect the mirror harness.
    • Replace the insulation.
  4. step : Replacing the Door Panel (5:19)
    • Remove the lock bezel from the door panel by pushing the clips in.
    • Line up the door panel and hang it back onto the door.
    • Pull your harnesses up through the door panel.
    • Replace the four Phillips screws.
    • Reconnect the switch panel and press it down into place.
    • Replace the door handle and tighten the T40 bolt.
    • Replace the lock bezel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I love my new mirrors. I like the turn signal in it to give it an updated look. Installation was a little bit harder than what I thought but I would definitely recommend. I was going to get the 4the gen ones but a little more than what I wanted to spend. The mirror arms have a notch that they pop into when you swing them back out. The ones that were on there didn't have that. They are very sturdy and look nice on the truck.
August 21, 2017
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 17 answers
Do I need to install a special resistor or relay to allow the LED to function properly off of the turn signals? (4th gen mirrors going on a 3rd gen truck)
Justin on Jun 6, 2018
BEST ANSWER: We advise that you order mirrors with the same exact mirror options as your original mirrors.

Special Note:

These mirrors will only work for vehicles with these exact options. If you do not have the options listed, these mirrors will not function properly.

Our mirrors are intended to be a direct plug and play for the exact options listed.
Can these be put on a Dodge Ram that didn't have power mirrors from the factory?
Tyler M on Sep 23, 2016
BEST ANSWER: I would think not unless you run power to them. They rely on the factory wiring harness for power.
Does the light on the unit also serve the purpose of a running light and not just a blinker?
Terry H on Oct 19, 2015
BEST ANSWER: Hello and thank you for contacting us. These mirror turn signals will not double as the running lights, they will just be the turn signals. When purchasing mirrors you will want to make sure you match the electrical options on your existing mirrors to make sure the mirrors are plug and play. Thank you and have a great day!
I have heated and power tow mirrors from factory but I want power fold in mirrors, do these have that, and if so could I install them on my truck?
Tyler M on Sep 23, 2016
BEST ANSWER: No, the power fold is no longer a current "upgrade" feature
What kind of bulb does it use?
Terry S on Dec 25, 2015
BEST ANSWER: There are no bulb specs. I believe they are LED's used in this mirror.
How bad is the vibration compared to MOPAR replacements? I have a set of non-Mopar OEM's and its terrible, even at idle. basically useless. OEM mirrors have 4 metal tabs that stabilize the mirror glass. Since my current mirrors are junk pulling a 5er looking to replace but don't want to pay the coin for OEM's if possible. So again, how bad is the vibration, if any, at cruising speed? Thanks!
Christopher Y on Apr 4, 2017
BEST ANSWER: There will be some vibration, however it should not be unbearable. Our mirrors are designed to ensure that there is minimal vibration.
I have powered towing mirrors. Will I be able to use the heated mirror aspect of these mirrors with my stock power mirrors switch...or how does that work?
John K on Mar 24, 2017
BEST ANSWER: The heat function will not work, this only comes with wiring to upgrade to turn signals.

Vehicle Fit

  • 2002-2008 Dodge Ram 1500 Truck Power Heated LED Turn Signal Manual-Folding Textured Black Flip-Up Towing Mirror Pair
  • 2003-2009 Dodge Ram 2500 Truck Power Heated LED Turn Signal Manual-Folding Textured Black Flip-Up Towing Mirror Pair
  • 2003-2009 Dodge Ram 3500 Truck Power Heated LED Turn Signal Manual-Folding Textured Black Flip-Up Towing Mirror Pair

This part replaces:

  • OE # 55077926AC
  • OE # 55077925AD
  • Trail Ridge TR00113
Part #: 1AMRP00913

Trail Ridge
Brand #: TR00113

How-to Video:

(08:08 min)