Dodge Jeep Chrysler Ram Mitsubishi Oil Pressure Switch Standard Motor Products

This oil pressure switch is just what you need to bring your vehicle back to like-new status!

Specifications:

• Oil Pressure Sending Switch
• 1 Terminal
• Direct Replacement
• Correct electrical connection
• Built to strict quality control standards
• Correct for models with oil pressure light
  • Not correct for applications with oil pressure gauge
    

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Removing the Oil Pressure Sensor (0:37)

• Place a drain pain underneath the oil pressure sensor
• Pry out the red tab on the oil pressure sensor with a pick
• Remove the oil pressure sensor with a 27mm socket

step : Installing the Oil Pressure Sensor (1:15)

• Feed the oil pressure sensor into place
• Twist the oil sensor pressure into place by hand
• Tighten the sensor with a socket and ratchet
• Reconnect the oil pressure sensor harness
• Push the red tab back in on the sensor harness