Replaces

Dodge Jeep Chrysler Ignition Coil TRQ ICA61817 - 1AECI00244

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

 

Specifications:

  • Brand New
  • Replaces dealer part number: 4606824AB, 4606824AC
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested

This coil is for a distributorless application. Sold as a EACH. Replace individually as needed.

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:36)
    • Disconnect the ignition coil wiring harness by hand
    • Remove the T30 bolt from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New ignition Coil (1:15)
    • Place the ignition coil into place
    • Insert the T30 bolt into the ignition coil
    • Connect the ignition coil wiring harness

Tools needed for replacement:

    Star Drivers & Sockets

  • T30 Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2011-2014Chrysler 200 Chrysler 200 L4 2.4L Ignition Coil TRQ
2007-2010Chrysler Sebring Chrysler Sebring L4 2.4L Ignition Coil TRQ
2008-2014Dodge Avenger Dodge Avenger L4 2.4L Ignition Coil TRQ
2007-2009Dodge Caliber Dodge Caliber L4 1.8L Ignition Coil TRQ
2007-2012Dodge Caliber Dodge Caliber L4 2.0L Ignition Coil TRQ
2007-2011Dodge Caliber Dodge Caliber L4 2.4L Ignition Coil TRQ
2009-2017Dodge Journey Dodge Journey L4 2.4L Ignition Coil TRQ
2007-2017Jeep Compass (MK) Jeep Compass (MK) L4 2.4L Ignition Coil TRQ
2007-2017Jeep Compass (MK) Jeep Compass (MK) L4 2.0L Ignition Coil TRQ
2007-2017Jeep Patriot (MK) Jeep Patriot (MK) L4 2.4L Ignition Coil TRQ
2007-2017Jeep Patriot (MK) Jeep Patriot (MK) L4 2.0L Ignition Coil TRQ
Part 1AECI00244
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: ICA61817