Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 55077238AB, 55077238AD, 55077239AB, 55077239AD
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with Steel Bumper only
These fog light bezels are great replacements and have good cost savings over bezels from the dealer.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Servicing the Bulbs (0:37)
    • Twist the bulb socket counterclockwise out of the light
    • Disconnect the wiring harness
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  2. step : Removing the Fog Lights (1:30)
    • Remove the 10mm screws from the fog light
    • Remove the fog light
  3. step : Installing the Fog Lights (1:50)
    • Insert the fog light into place
    • Tighten the 10mm screws to the fog light

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Right parts.
Fit real good. Snapped right into place with no problems.
March 2, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How do you install?
Dave M March 2, 2017
They just slide into place. Old ones come out just as easy. They are only held in by tabs/clips
Chris S March 2, 2017
Dave, I have the same question and asked it to 1A Auto a few weeks ago. How can something that comes out easily be so hard to replace!!!
Frank T March 2, 2017
Best advice I can give you is, PUSH!!! It was so difficult.
James S March 2, 2017
The bezel and the fog lights become one being held in place with the bolts from the fog lights
Steven R March 2, 2017
The bezel has alignment tabs on the sides, and should press into the bumper which has the same set up. You will need to use some force in order to have these stay in place.
Alex P March 2, 2017
Mine just snapped into place. They have stayed put for 6 months now, no problems. This was the third set I tried, and the only set that fit. Very happy.
KIMBERLY G March 3, 2017
You have to remove the factory bezel first. Best thing is to use a small screwdriver and stick in beside the bezel and bumper cause it to flex so you can pull it out. When installing the new one put it up to the hole in the bumper might have to make it flex a little then it should go in. Dont worry if its gapped a little it while lay flat after it warms up.
Jeremy C March 3, 2017
They pop in the frame, very easy
Jim B March 4, 2017
Year Make Model Description
2002-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Pair Steel Bumper for Models with Fog Light Bezel
2003-2009Dodge Ram 2500 Truck Dodge Ram 2500 Truck Pair Steel Bumper for Models with Fog Light Bezel
2003-2009Dodge Ram 3500 Truck Dodge Ram 3500 Truck Pair Steel Bumper for Models with Fog Light Bezel
Part #: 1ABMK00150


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:38 min)