Replaces

Dodge Durango Ram 1500 Truck Brake Kit Nakamoto MD966, MD898, 52010080AE, 52009968AC - 1ABFS01504

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi SEMI-METALLIC Disc Brake Pads
  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 52009968AC, 52009968AA, 52009968AB, 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fit 5 Lug Wheels
  • FRONT - 13.2" Diameter
  • REAR - 13.86" Diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:17)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:50)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (6:10)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. step : Put wheel back on (10:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Nakamoto brakes
Very nice packaging. Very good fit. The quality seems very good.
November 5, 2017
Purchased
4 months ago
I enjoy shopping at 1A Auto I am so glad I came across this website from now on I will purchase all my auto parts here and I will recommend every one I no to buy their parts right here at 1A Auto I'm in for the long haul you all ways have what I need and my parts are deliver when you say they are going to be delivered you guys are the best in my book keep doing a great job I appreciate your business Thanks Mr.Benjamin Raleigh.
February 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this fit a 2004 dodge dakota?
Robert H on Feb 2, 2017
BEST ANSWER: These parts are specific to the 2004 model Dodge Durango and Dodge Ram 1500 models. If you are interested in a front and rear brake pad and rotor kit for your Dakota we do not have the appropriate parts available but recommend visiting a website www.partfinder.com to find a vendor with these parts available.

How-to Video:

(11:30 min)

Tools List:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket



This part replaces:

  • Nakamoto MD966, MD898, 52010080AE, 52009968AC

Vehicle Fit

  • 2004 Dodge Durango Front & Rear Brake Kit Premium Posi Semi-Metallic Nakamoto
  • 2002-2003 Dodge Ram 1500 Truck Front & Rear Brake Kit Premium Posi Semi-Metallic Nakamoto
  • 2004-2005 Dodge Ram 1500 Truck Brake Kit Premium Posi Semi-Metallic excluding SRT-10 Front & Rear Nakamoto
Part #: 1ABFS01504

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD966, MD898, 52010080AE, 52009968AC

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More