Replaces

Dodge Durango Ram 1500 Truck Brake Kit Front Raybestos SGD966M, 780073R - RABFS00042

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD & ROTOR KIT: SGD966M, 780073R

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Brake Pad Specifications:

  • Brand New Raybestos Service Grade Front Brake Pad Set
  • Material: Semi-metallic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 05080556AA, 05080556AC, 05080556AE, 05093796AA, 05134584AA, 05139733AA, 5080556AA, 5080556AC, 5080556AE, 5093796AA, 5134584AA, 5139733AA

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Replaces dealer part numbers: 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fits 5 Stud Wheels
  • 13.2" Diameter

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 13.20" (335mm)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:17)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:50)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (6:10)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. step : Put wheel back on (10:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2006Dodge Durango Dodge Durango Front Brake Kit Semi-Metallic Raybestos SGD966M, 780073R
2002-2003Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake Kit Semi-Metallic Raybestos SGD966M, 780073R
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Brake Kit Semi-Metallic (excluding SRT-10) Raybestos SGD966M, 780073R

This part replaces:

  • Raybestos SGD966M, 780073R
Only 2 left in stock
Part #: RABFS00042


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Raybestos
Brand #: SGD966M, 780073R

How-to Video:

(11:30 min)