Replaces

Dodge Dakota Durango Wheel Bearing & Hub Assembly TRQ BHA50031 - 1ASHS00032

Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Fit 6 Lug Wheels
  • Replaces dealer part numbers: 52069361AB, 52069361AC
  • Direct replacements
  • Built to strict quality control standards
  • New wheel studs installed
  • Fit 4WD (Four Wheel Drive) Models only
  • Fit models with RWAL (Rear Wheel Anti-Lock Brakes) only
Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA50006 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:10)
    • While your car is still on the ground, use your 32mm socket to loosen the center hub nut
    • Loosen your lug nuts and jack up the car
    • Remove the lug nuts with your 19mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Brakes (1:20)
    • Remove the T47 torx bolts holding the calipers and the bracket
    • Wire tie the caliper up and out of the way, set the bracket to the side
    • Remove your rotor and set aside
  3. step : Removing the Axle (1:56)
    • Remove the 14mm bolts securing the axle
    • Use an axle puller or a light, but firm, tap with a small hammer on the axle to remove it
  4. step : Remving the Hub (5:30)
    • Remove the three 22 mm bolts, using penetrating oil to help
    • A breaker bar or piece of pipe on the end of your ratchet may be needed
    • Remove the hub and clean the area with a wire brush
  5. step : Replacing the Hub (7:20)
    • Clean hub seating with a wire brush and add a little anti-seize grease
    • Put position your new 1A Auto hub in its seating
    • Put the three 22 mm bolts in place and tighten the nuts to 90 ft lbs
    • Reinstall the axle and torque the 14 mm bolts to 60 ft lbs
  6. step : Reinstalling the Brakes and Wheel (8:45)
    • Refer to our other videos for more detailed instructions
    • Remember to replace the lug nuts on in a star pattern
    • Lug nuts tighten to 90-100 ft lbs
    • Hub nut is 175 ft lbs
    • Make sure to check your brakes and steering before driving again
    • Make sure to have the vehicle aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 32mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket

4.4 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
3
0
0
1
Very good product. I'm still rolling on these wheel bearings today. Very good deal. I'm happy with them. Thanks again 1aauto.
July 29, 2018
Purchased
1 year ago
Everything fit good
Fit perfect no more noisy steering only have about 300 miles on them but I haven't had any issues yet
July 26, 2018
Purchased
2 months ago
As usual, parts came quick, and we'll packed. Direct fit. Important information included.Write
April 8, 2018
Purchased
5 months ago
1 Month Review
Only been 1 month but bearings fit well and seem to be working quietly. Torque spec for the axle nut was included in the box and shipping was faster than expected.
Very Pleased.
BG
March 24, 2018
Purchased
5 months ago
Fit as Expected
These fit perfectly. They looked great and made my truck sound great too! So happy that I don't have to listen to that constant groan.
March 17, 2018
Purchased
5 months ago
Perfect
The bearing & hubs worked out perfectly. Customer service was great, deliver was quicker than quoted.
September 13, 2017
Purchased
11 months ago
Perfect fit
Perfect fit and they seem to be good quality. Bearings looked great and metallurgy, while not perfect casting, looked good. No problems with them after 200 miles. Hopefully around 100,000 more...
April 23, 2017
Purchased
1 year ago
Thank you
I was pleasantly surprised by the fast shipping. This parts fit perfect for my 2003 Durango. The video clip was very helpfull so i was able to change the hubs alone. All the noise is gone so i can enjoy the smoth ride.
What you can think about is providing at least a pair of cotter pins.
February 6, 2017
Purchased
1 year ago
Thanks
Thank you for quick shipping, good, clean parts.
If ever i I need to get parts again, I will certainly shop here again
February 5, 2017
Purchased
1 year ago
Wore Out Fast
I bought this pair of Hubs 2 years ago and now have to do the job all over again. You get what you pay for.Do yourself a favor and get the Timkin HA599361 Hubs.
February 10, 2016
Response from 1A Auto
I am sorry to hear that these have gone out on you just outside the warranty. These come with a two year warranty which according to your order would have ended in January. Please call 888-844-3393 we will warranty both hubs for you because you have yet to warranty them over the last two years. We do stand by the quality of our parts! I have noted your account to get you two new hubs, so please give us a call when you have a chance.
February 15, 2016
Derek C Staff
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
How can you find out what abs system you have?
Joe L on Dec 12, 2015
BEST ANSWER: Hello, You can call your Dodge dealer parts department with your VIN# to verify ABS options from the factory.

Vehicle Fit

  • 1997-2004 Dodge Dakota 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes Pair TRQ
  • 1998-2003 Dodge Durango 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes Pair TRQ

This part replaces:

  • TRQ BHA50031
Part #: 1ASHS00032


Order must be placed by 4pm ET
TRQ
Brand #: BHA50031

How-to Video:

(12:36 min)