Replaces

Dodge Dakota Durango Wheel Bearing & Hub Assembly TRQ BHA50006 - 1ASHF00029

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 6 Lug Wheel
  • Replaces dealer part numbers: 52069361AB, 52069361AC
  • Direct replacement
  • Built to strict quality control standards
  • New wheel studs installed
  • Fits 4WD (Four Wheel Drive) Models only
  • Fits models with RWAL (Rear Wheel Anti-Lock Brakes) only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA50006 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:10)
    • While your car is still on the ground, use your 32mm socket to loosen the center hub nut
    • Loosen your lug nuts and jack up the car
    • Remove the lug nuts with your 19mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Brakes (1:20)
    • Remove the T47 torx bolts holding the calipers and the bracket
    • Wire tie the caliper up and out of the way, set the bracket to the side
    • Remove your rotor and set aside
  3. step : Removing the Axle (1:56)
    • Remove the 14mm bolts securing the axle
    • Use an axle puller or a light, but firm, tap with a small hammer on the axle to remove it
  4. step : Remving the Hub (5:30)
    • Remove the three 22 mm bolts, using penetrating oil to help
    • A breaker bar or piece of pipe on the end of your ratchet may be needed
    • Remove the hub and clean the area with a wire brush
  5. step : Replacing the Hub (7:20)
    • Clean hub seating with a wire brush and add a little anti-seize grease
    • Put position your new 1A Auto hub in its seating
    • Put the three 22 mm bolts in place and tighten the nuts to 90 ft lbs
    • Reinstall the axle and torque the 14 mm bolts to 60 ft lbs
  6. step : Reinstalling the Brakes and Wheel (8:45)
    • Refer to our other videos for more detailed instructions
    • Remember to replace the lug nuts on in a star pattern
    • Lug nuts tighten to 90-100 ft lbs
    • Hub nut is 175 ft lbs
    • Make sure to check your brakes and steering before driving again
    • Make sure to have the vehicle aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 32mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great product and service
I called them up with what I needed and the representative was great and made it simple. I received my part fast and installed it. I was very pleased with the quality and the price. It has been doing great with no issues. I would definitely highly recommend 1a auto and their products.
February 19, 2017
Purchased
1 year ago
Wheel hub for 2003 Durango
Wheel hub fits great. Smooth driving and quiet. Great buy!!
January 29, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What is the reason for having to remove the axle shaft to replace the wheel bearing hub on a 2003 Dodge Dakota 4x4?
Glenn S on May 26, 2016
BEST ANSWER: I have a 2001 Dakota 4X4 and have changed both sides, one side twice and did not take the axle shaft out. I took off nut and went around out side of hub with a chisel or tapered edge bar to pry out.

How-to Video:

(12:36 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 32mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket



This part replaces:

  • Hollander 538-01426, 538-01607
  • OE # 52069361AB 52069361AC
  • TRQ BHA50006

Vehicle Fit

  • 1997-2004 Dodge Dakota 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes TRQ
  • 1998-2003 Dodge Durango 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes TRQ
Part #: 1ASHF00029

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA50006

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More