Replaces

Dodge Dakota Durango Wheel Bearing & Hub Assembly Pair Front - 1ASHS00091

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fit 6 Lug Wheels
  • Replaces dealer part numbers: 52009528, 52009528AC, 52009528AD, 52009528AE
  • Direct replacements
  • Built to strict quality control standards
  • New wheel studs installed
  • Fit 2WD (Two Wheel Drive) Models only
  • Fit models with RWAL (Rear Wheel ABS) only

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53946 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:10)
    • While your car is still on the ground, use your 32mm socket to loosen the center hub nut
    • Loosen your lug nuts and jack up the car
    • Remove the lug nuts with your 19mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Brakes (1:20)
    • Remove the T47 torx bolts holding the calipers and the bracket
    • Wire tie the caliper up and out of the way, set the bracket to the side
    • Remove your rotor and set aside
  3. step : Removing the Axle (1:56)
    • Remove the 14mm bolts securing the axle
    • Use an axle puller or a light, but firm, tap with a small hammer on the axle to remove it
  4. step : Remving the Hub (5:30)
    • Remove the three 22 mm bolts, using penetrating oil to help
    • A breaker bar or piece of pipe on the end of your ratchet may be needed
    • Remove the hub and clean the area with a wire brush
  5. step : Replacing the Hub (7:20)
    • Clean hub seating with a wire brush and add a little anti-seize grease
    • Put position your new 1A Auto hub in its seating
    • Put the three 22 mm bolts in place and tighten the nuts to 90 ft lbs
    • Reinstall the axle and torque the 14 mm bolts to 60 ft lbs
  6. step : Reinstalling the Brakes and Wheel (8:45)
    • Refer to our other videos for more detailed instructions
    • Remember to replace the lug nuts on in a star pattern
    • Lug nuts tighten to 90-100 ft lbs
    • Hub nut is 175 ft lbs
    • Make sure to check your brakes and steering before driving again
    • Make sure to have the vehicle aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 32mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket

4.3 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
2
0
0
1
It's been a week with my new wheel bearing & hub assembly and it's been riding good
February 6, 2017
Purchased
1 year ago
Perfect fit!
Purchased a set of these for my truck, they arrived ahead of schedule and were well packaged. Installation was easy and had no issues with fitment etc.; added new brake pads and truck handled great!
February 23, 2018
Purchased
over 3 years ago
Smooth!
Smooth Riding bearing!!! I now know where to go for auto parts.
June 23, 2017
Purchased
10 months ago
fast shipping, bearing fixed problems. Very satisfied with purchase and customer support at 1aauto
March 14, 2017
Purchased
12 months ago
Dodge Durango wheel bearing and inner tie rods
Both products are very exceptional my truck rides a whole lot better and you can actually feel the difference,I will be buying more parts..#hometeam
January 7, 2018
Purchased
2 months ago
Thanks again they are working great.
Thanks again for your business it saves me money. I have a lot of car's and trucks.
October 3, 2017
Purchased
5 months ago
great price guaranteed fit and world class warranty
I received my bearings in great time were exactly right fit for my truck and even if i didnt know how to replace they sent link on how to.Would definitely reccomend!!!!!
September 14, 2017
Purchased
6 months ago
Bad
Wont fit on spindle, and back of bearing fell off. But as Always 1A took care of it, great company.
April 13, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 7 answers
Does the 2002 dodge dakota 2 wheel drive front hub set come with new spindle nuts?
mark b on Sep 10, 2016
BEST ANSWER: Mark those will have to be ordered from a Dodge dealer and because of the teflon locking ring they can't be reused. If I remember correctly I believe they cost about $20.00 a pair.
what brand are these?
wyatt h on Nov 23, 2016
BEST ANSWER: I purchased these over a year ago and the box didn't have a brand name on it. They came in a white box which usually means China made. I haven't had any problems and they have a warranty so if they do go bad just replace, they are easy to put in and 1aauto is very good on warranties.

How-to Video:

(12:36 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 32mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket




Vehicle Fit

  • 1997-2004 Dodge Dakota 2 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes Pair
  • 1998-2003 Dodge Durango 2 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes Pair
Part #: 1ASHS00091

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More