Replaces

Dodge Dakota Durango Suspension Kit Front - 1ASFK00727

These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • FRONT Suspension Kit includes:
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (1) - FRONT Idler Arm (14mm Mounting Studs)
    • (1) - FRONT Pitman Arm
  • Replaces dealer part numbers: 5104788AB, 52038886AB, 52106084AA, 52038803, 4883138, 4883136, 4883139
  • Parts are new, not remanufactured or refurbished
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (4 Wheel Drive) Models only
  • Only fits models with Idler Arm with 14mm Mounting Studs

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 7 answers
if i don't have 14mm idler arm studs will the other parts stil fit?
rick b on Feb 4, 2016
BEST ANSWER: It is a possibility. Without the vehicle information it is hard to tell. You can give us a call at 888-844-3393 we can have a rep help you out.
how do i know if i have 14mm mounting studs for idler arm?
rick b on Feb 4, 2016
BEST ANSWER: You can go and measure it if you have access to it. You may also be able to call the dealership with your VIN number to find out.
Tools required for installation ?
Ferg73 on Dec 1, 2015
BEST ANSWER: Hello, I can give you a general list but not limited too the following:
hand grinder
assortment of wrenches
ball joint press
pickle fork
pliers
hammer
flathead screwdrivers
LARGE adjustable wrench
Large socket for pitman arm nut
airgun or breaker bar
grease gun
depending on age age and mileage, torches to heat up stuck nuts and bolts
If your doing this job yourself without a lift or airtools, plan on a good 6 hrs or so of labor
do the ball joints have grease fittings?
Dylan G on Mar 12, 2016
BEST ANSWER: No these are pregreased and sealed from the factory


Vehicle Fit

  • 1997-1999 Dodge Dakota 4 Wheel Drive Front Suspension Kit
  • 1998-1999 Dodge Durango 4 Wheel Drive Front Suspension Kit
Part #: 1ASFK00727

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More