Replaces

Dodge Dakota Durango Shock Absorber TRQ SBA60642 - 1ASHA00159

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the rear shocks (0:52)
    • Raise and secure your vehicle, and jack up the control arm.
    • Take the spare tire out so its not in your way.
    • Remove the two bolts on each side of the shock.
    • Use a breaker bar and a socket and a combination wrench on the other side of the bolt to remove the bolt.
    • Repeat on the top side, using an 18 mm wrench and a 15 mm socket and ratchet/breaker bar.
  2. step : Install the new shocks (4:06)
    • Mount the shocks in and thread the two bolts through each end.
    • Bolt them down with your socket and ratchet and wrench.
    • Torque the bolts nice and tight, consulting your owner’s manual for the specification.
    • Replace the spare tire and lower your vehicle.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2004 Dodge Dakota 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side TRQ SBA60642
  • 1998-2003 Dodge Durango 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side TRQ SBA60642

This part replaces:

  • Monroe 37140
  • KYB 344379
  • TRQ SBA60642
Part #: 1ASHA00159

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: SBA60642

How-to Video:

(06:29 min)