Replaces

Dodge Dakota Durango Shock Absorber Monroe Sensa-Trac 37140 - MNSHA00170

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the rear shocks (0:52)
    • Raise and secure your vehicle, and jack up the control arm.
    • Take the spare tire out so its not in your way.
    • Remove the two bolts on each side of the shock.
    • Use a breaker bar and a socket and a combination wrench on the other side of the bolt to remove the bolt.
    • Repeat on the top side, using an 18 mm wrench and a 15 mm socket and ratchet/breaker bar.
  2. step : Install the new shocks (4:06)
    • Mount the shocks in and thread the two bolts through each end.
    • Bolt them down with your socket and ratchet and wrench.
    • Torque the bolts nice and tight, consulting your owner’s manual for the specification.
    • Replace the spare tire and lower your vehicle.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2004 Dodge Dakota 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side Monroe Sensa-Trac 37140
  • 1998-2003 Dodge Durango 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side Monroe Sensa-Trac 37140

This part replaces:

  • Monroe Sensa-Trac 37140
Only 4 left in stock
Part #: MNSHA00170

Ships Same Day for orders placed by 4 P.M. ET

Monroe Sensa-Trac
Brand #: 37140

How-to Video:

(06:29 min)