Dodge Dakota Durango Mirror - 1AMRE00125

Specifications:

• LH (driver's side)
• Power operation - movement controlled by a switch
• Folding - allows mirror to lay flat against the door
• 6" x 9" mirror size
• Sail design - Mounts in the corner of the door
• Injection molded plastic housing
• Black matte finish
• Direct replacement
• Can be painted by the buyer to any color desired or installed as is
• Includes foam gasket that fits between door and mirror
• Built to strict quality control standards
• Unheated

Special Note:

• Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Door Panel (0:54)

• Remove the five Phillips screws from around the door panel (one screw is behind the door handle).
• Lift the door panel and pull it out.
• Disconnect the mirror connector.
• Disconnect the door handle cable.
• Disconnect the window switch harness.

step : Removing the Side Mirror (2:31)

• Pull back the pad.
• Disconnect the harness.
• Remove the three 10mm nuts.
• Push the harness out and pull the mirror free.

step : Replacing the Side Mirror (3:43)

• Feed the mirror harness down through the door.
• Line up the mirror and push it into place.
• Replace the three 10mm bolts.
• Replace the pad.
• Reconnect the harness.

step : Replacing the Door Panel (4:42)

• Push your lock through the door panel.
• Reconnect the window switch harness.
• Reconnect the door handle cable.
• Reconnect the mirror connector.
• Lift the door panel up into place and push it down into place.
• Replace the five Phillips screws.