Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the parking light (1:17)
    • Remove the gasket from the pins securing it to the side of the headlight.
    • Remove the screw on the bottom corner of the headlight using your T10 Screwdriver.
    • Remove the parking light and unplug the bulbs.
  2. step : Remove the headlight assembly (2:30)
    • Remove the 3 bolts securing the headlight.
    • Remove the little pin securing the headlight using a cloth and screwdriver.
    • Unplug the harness.
    • To remove the bulbs just twist the locking ring and unplug the bulb.
    • Remove the pin that had been fastening the headlight in by pinching it and pulling it out to use later.
  3. step : Install the new headlight assembly (4:48)
    • Clip the pin into the new headlight that you removed in the last step.
    • Line up your headlight and click it into place.
    • Make sure your marker light is in the right spot.
    • Bolt everything back in.
    • Plug the parking light bulbs in.
    • Screw the parking light in with your T10 Torx driver
    • Pin the rubber gasket on, making sure to fold the gasket in the first time you close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T10 Torx Driver

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
Looks great very easy installation. Would definitely recommend. Truck looks new again
May 23, 2018
Purchased
3 weeks ago
Headlight package
Fitment is perfect, great look. Only con is that the rubber weather strip for headlights is already starting to crack only after a few weeks
March 30, 2018
Purchased
2 months ago
I can see!!!!!
Finally I can see at night now! The adjuster screw pulled through and had to remove the left headlamp assembly.
July 9, 2017
Purchased
11 months ago
Durango Headlights and Fog Lights
Product arrived quickly and was exactly what I ordered. The installation video was very helpful!
Excellent product and great price.
March 4, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
The product is showing headlight assembly and 2 fog lamps,but the description says parking lights??
Dale K on Aug 7, 2017
BEST ANSWER: Yes, this kit includes fog lamps. A bit of a website typo there!
Does this include bulbs?
jeff a on Apr 22, 2018
BEST ANSWER: Our lights do not include the bulbs. You may be able to reuse your original bulbs.

Vehicle Fit

  • 2001-2004 Dodge Dakota 4 Piece Set Lighting Kit
  • 2001-2003 Dodge Durango 4 Piece Set Lighting Kit

This part replaces:

  • TYC 19-5561-00-1
  • TYC 20-5064-09-1
  • TYC 20-5063-09-1
  • Partslink CH2592113 CH2593113
  • Hollander 114-490l
  • Hollander 114-490R
  • Hollander 116-02267
  • OE # 55055111AG
  • OE # 55055110AF
  • OE # 55077320AB
  • Partslink CH2502122
  • Partslink CH2503122
Part #: 1ALHT00160


How-to Video:

(09:18 min)