Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   Cornering Lamp

Specifications:
  • RH (Passenger Side)
  • Includes lens, housing, mounting panel and rubber filler
  • Includes combination parking/signal lamp assembly
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove the parking light (1:17)
    • Remove the gasket from the pins securing it to the side of the headlight.
    • Remove the screw on the bottom corner of the headlight using your T10 Screwdriver.
    • Remove the parking light and unplug the bulbs.
  2. step : Remove the headlight assembly (2:30)
    • Remove the 3 bolts securing the headlight.
    • Remove the little pin securing the headlight using a cloth and screwdriver.
    • Unplug the harness.
    • To remove the bulbs just twist the locking ring and unplug the bulb.
    • Remove the pin that had been fastening the headlight in by pinching it and pulling it out to use later.
  3. step : Install the new headlight assembly (4:48)
    • Clip the pin into the new headlight that you removed in the last step.
    • Line up your headlight and click it into place.
    • Make sure your marker light is in the right spot.
    • Bolt everything back in.
    • Plug the parking light bulbs in.
    • Screw the parking light in with your T10 Torx driver
    • Pin the rubber gasket on, making sure to fold the gasket in the first time you close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T10 Torx Driver

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Quick shipping fit perfect!
I like that these shipped out really fast and I was able to get them installed quickly. I can see at dark once again!!! To top all that the price on the pair was better then I was able to find at any of the auto parts stores for one.
September 28, 2018
Very good
Item as described. Arrived quickly. Replaced headlight assembly after hit a deer. Video helped me to install.
October 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2004Dodge Dakota Dodge Dakota Headlight with Cornering Lamp Passenger Side
1998-2003Dodge Durango Dodge Durango Headlight with Cornering Lamp Passenger Side
Part #: 1ALHL00470


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:18 min)