Specifications

  • LH (Driver Side)
  • Includes lens, housing, mounting panel and rubber filler
  • Includes combination parking/signal lamp assembly
  • Bulbs not included
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the parking light (1:17)
    • Remove the gasket from the pins securing it to the side of the headlight.
    • Remove the screw on the bottom corner of the headlight using your T10 Screwdriver.
    • Remove the parking light and unplug the bulbs.
  2. step : Remove the headlight assembly (2:30)
    • Remove the 3 bolts securing the headlight.
    • Remove the little pin securing the headlight using a cloth and screwdriver.
    • Unplug the harness.
    • To remove the bulbs just twist the locking ring and unplug the bulb.
    • Remove the pin that had been fastening the headlight in by pinching it and pulling it out to use later.
  3. step : Install the new headlight assembly (4:48)
    • Clip the pin into the new headlight that you removed in the last step.
    • Line up your headlight and click it into place.
    • Make sure your marker light is in the right spot.
    • Bolt everything back in.
    • Plug the parking light bulbs in.
    • Screw the parking light in with your T10 Torx driver
    • Pin the rubber gasket on, making sure to fold the gasket in the first time you close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T10 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2004 Dodge Dakota Headlight with Cornering Lamp Driver Side
  • 1998-2003 Dodge Durango Headlight with Cornering Lamp Driver Side

This part replaces:

  • Partslink CH2502122
  • Hollander 114-490l
  • OE # 55055111AG
  • TYC 20-5064-09-1
  • DEPO 333-1130L-ASC
Part #: 1ALHL00469



How-to Video:

(09:18 min)