Specifications

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Includes lens, housing, mounting panel and rubber filler
  • Includes combination parking/signal lamp assembly
  • Bulbs not included
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the parking light (1:17)
    • Remove the gasket from the pins securing it to the side of the headlight.
    • Remove the screw on the bottom corner of the headlight using your T10 Screwdriver.
    • Remove the parking light and unplug the bulbs.
  2. step : Remove the headlight assembly (2:30)
    • Remove the 3 bolts securing the headlight.
    • Remove the little pin securing the headlight using a cloth and screwdriver.
    • Unplug the harness.
    • To remove the bulbs just twist the locking ring and unplug the bulb.
    • Remove the pin that had been fastening the headlight in by pinching it and pulling it out to use later.
  3. step : Install the new headlight assembly (4:48)
    • Clip the pin into the new headlight that you removed in the last step.
    • Line up your headlight and click it into place.
    • Make sure your marker light is in the right spot.
    • Bolt everything back in.
    • Plug the parking light bulbs in.
    • Screw the parking light in with your T10 Torx driver
    • Pin the rubber gasket on, making sure to fold the gasket in the first time you close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T10 Torx Driver

4.1 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
0
1
1
1
headlight replacement purchase
purchased product was a perfect fit. Easy to adjust.Looks good and works great.
March 18, 2017
Purchased
11 months ago
Awesome!
Great price, quick shipping. Got them a day earlier than promised and they fit like a glove..
February 2, 2017
Purchased
1 year ago
2001 Dodge Durango
Received the shipment the same week of order. All parts arrived in good condition. Replacement was easy but I did check out your videos on replacement to ensure that I was on correct with my installation. I have purchased several items over the years and remain perfectly satisfied with all my purchases. Thanks for keeping my 2001 Dodge Durango looking and operating like new.
October 3, 2017
Purchased
5 months ago
Perfect replacement item. No problem with install. Would recommend to anyone...............
December 25, 2017
Purchased
2 months ago
new headlights
This is the best deal out there, it came with light bulbs and the rubber skirt for the grill, perfect fit. I can see again going down the road.
September 18, 2017
Purchased
5 months ago
The fit was perfect. They got rid of the hex screw in the middle for a phillips head. So much easier.
October 8, 2017
Purchased
4 months ago
Dakota headlights
Thank you for a great product, I was easy to install , following your video and they look great!
February 6, 2018
Purchased
3 weeks ago
headlight review
Received in good condition. Only problem was the adjusting screw for raising and lowering.
Right lamp screw pulled through the assembly before adjustment limits.
January 24, 2017
Purchased
1 year ago
adjustment problem
after installing adjustment side to side was ok, but trying to adj up would not move at all because adj screw in back is not open to adj ,it is covered by plastic. so at night, lights shine about 15 ft. out .really bad if raining or dark roads. maybe lights are just poor quality, even though they look a lot better than the 1999's
February 12, 2017
Purchased
1 year ago
Not Great
The screw holding the turn signal assembly on to the headlight was stripped out of the box. That makes it pretty difficult to take apart. Still waiting to return it for either a new one or my money back. I initiated the return process a week ago and still have heard nothing. Not impressed.
December 3, 2017
Purchased
3 months ago
Response from 1A Auto
Thank you for your review! We are sorry you received the light like that. Our systeom does not show that you've made contact with us yet, but we would be more than happy to help you out. Please contact us by phone and we would be happy to send out a replacement for you. Thank you!
December 4, 2017
Adam GStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 11 answers
Do these headlight assemblies come with the three torx screws for each side to install the assemblies?
bigman223able b on Dec 7, 2015
BEST ANSWER: I did this almost 2 years ago so I am not certain. I replaced the original headlights so I reused the screws that were there. As I recall there was no mounting screws in the box. Sorry I just don't remember.
What is the difference between 1ALHT00160 and 1ALHP00017?
Michael J. V on Apr 4, 2017
BEST ANSWER: 1ALHT00160 will include the headlights as well as the fog lights, while 1ALHP00017 is just the headlight pair.

How-to Video:

(09:18 min)

Tools List:

    Torx Drivers & Sockets

  • T10 Torx Driver



This part replaces:

  • OE # 55055110AF
  • OE # 55055111AG
  • Hollander 114-490l
  • Hollander 114-490R
  • Partslink CH2502122
  • Partslink CH2503122

Vehicle Fit

  • 1997-2004 Dodge Dakota Headlight with Cornering Lamp Pair
  • 1998-2003 Dodge Durango Headlight with Cornering Lamp Pair
Part #: 1ALHP00017

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More