Replaces

Dodge Dakota Durango Fog / Driving Light - 1ALFL00225

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Fog Light Specifications;

  • RH (Passenger Side)
  • Replaces dealer part numbers: 55076792, 55077266AA
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : To change the bulbs (1:00)
    • Under the bumper you can access the assembly.
    • Unplug the wiring connection.
    • Untwist the bulb.
  2. step : Remove the headlight assembly. (1:45)
    • Remove the T10 Torx screw between the parking and headlight.
    • Pull the parking light assembly out and disconnect the bulbs.
    • Remove the three 10 mm bolts now exposed.
    • Unclip the headlight assembly and transfer the clip back onto the vehicle.
  3. step : Remove the fog light assembly (3:29)
    • Now you can access the two 10 mm bolts at the top of the fog light assembly.
    • Remove the fog light.
  4. step : install the new fog light assembly (4:07)
    • Put the assembly into place.
    • Mount with the two 10 mm bolts.
    • Plug in the bulbs and wiring harness.
  5. step : Install the headlight assembly (4:49)
    • Plug in the wiring harness and bulbs.
    • Clip the headlight in and bolt the headlight in with your socket and ratchet.
    • Plug in your three bulbs and mount your parking light.
    • Secure with the T10 Torx screws.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2000Dodge Dakota Dodge Dakota Fog / Driving Light Passenger Side
1998-2000Dodge Durango Dodge Durango Fog / Driving Light Passenger Side
Part #: 1ALFL00225


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:52 min)