Dodge Dakota Durango Fog / Driving Light Pair - 1ALFP00095

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

This pair of fog driving lights is just what you need to get your vehicle in good looking form again!

Fog Light Specifications

  • Comes as a pair
  • Replaces dealer part numbers: 55076793, 55077267AA, 55076792, 55077266AA
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This pair of fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.


Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : To change the bulbs (1:00)
    • Under the bumper you can access the assembly.
    • Unplug the wiring connection.
    • Untwist the bulb.
  2. step : Remove the headlight assembly. (1:45)
    • Remove the T10 Torx screw between the parking and headlight.
    • Pull the parking light assembly out and disconnect the bulbs.
    • Remove the three 10 mm bolts now exposed.
    • Unclip the headlight assembly and transfer the clip back onto the vehicle.
  3. step : Remove the fog light assembly (3:29)
    • Now you can access the two 10 mm bolts at the top of the fog light assembly.
    • Remove the fog light.
  4. step : install the new fog light assembly (4:07)
    • Put the assembly into place.
    • Mount with the two 10 mm bolts.
    • Plug in the bulbs and wiring harness.
  5. step : Install the headlight assembly (4:49)
    • Plug in the wiring harness and bulbs.
    • Clip the headlight in and bolt the headlight in with your socket and ratchet.
    • Plug in your three bulbs and mount your parking light.
    • Secure with the T10 Torx screws.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great inexpensive replacement
These fit great and look great. Easy direct bolt-in replacement. If youre already replacing your headlights and turn signals, buy these at the same time! Otherwise, youll end up like me and have to pull the turn signals again to have easy access to the bolts securing the fog lights. My only concern is that the lenses seem to scratch fairly easily. If it werent for that, Id give them 5 stars.
October 23, 2017
Good stuff
Ordered both sides of headlights and fog lights. Everything was beyond all expectations in every way. The packaging was excellent with bubble wrap on all sides. No way outside of intent would anything be damaged. Lights arrived in perfect condition and are top quality and perfect fit. I have a 2000 Dakota with just over 100k that is perfect now with the new lights.
August 13, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have a 2000 dodge Dakota sport, and the stock bumper do not have the fog light holes cut out. What tool would I need to use to make a perfect circle?
Jay D January 8, 2016
These are just the factory replacement fog lights for models with existing fog lights. If you wanted to add them you can consult the forums, or a body shop. We do not have any customization instructions. Thank you and have a great day!
Derek C January 11, 2016
A dremel with a plastic or sheetrock bit will do the job. But make sure you tape off the area to give yourself a guide.
Robert R January 11, 2016
What is the thread size pitch and length of fog lamp mounting screws or bolts?Thanks
Corey H May 12, 2016
Sorry these specs are not available. They are the same as OEM.
Brian F May 13, 2016
Year Make Model Description
1997-2000Dodge Dakota Dodge Dakota Fog / Driving Light Pair
1998-2000Dodge Durango Dodge Durango Fog / Driving Light Pair
Part #: 1ALFP00095

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:52 min)