Replaces

Dodge Dakota Durango CV Axle Shaft TRQ CSA82133 - 1AACV00079

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT OUTER
  • Approximate Dimensions:
    • Length: 20-13/16"
    • Inboard Spline Count: 29
    • Outboard Spline Count: 31
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Note: You may need to reuse your original inner stub shaft with this new replacement CV axle.  The splined shaft on the inner joint from your original assembly can be removed and installed onto the new CV assembly.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel and remove the brakes. (1:00)
    • Loosen your lug nuts
    • Raise and secure the car.
    • Remove the lug nuts and wheel.
    • Unbolt the caliper and secure it up with a wire tie
    • Remove the rotor and set aside.
  2. step : Remove the axle (2:10)
    • Remove the cotter pin
    • Put the wheel back on and lower the car.
    • Use a 32 mm socket and breaker bar to remove the hub nut.
    • Raise and secure the car again and remove the wheel.
    • Give the axle a good rap with a hammer to loosen it.
    • Remove the bolts mounting the axle.
    • Pull out the axle.

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 14mm Socket
  • 32mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great
Great product for a great price. Items was delivered on time and installtion was easy
April 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What is the country of origin of this part?
Scotty A June 11, 2017
This will be made in either China, or Taiwan.
Alex P June 12, 2017
Year Make Model Description
2001Dodge Dakota Dodge Dakota Front Outer CV Axle Shaft Driver or Passenger Side (Built After 9/11/00 Production Date) TRQ CSA82133
2002-2004Dodge Dakota Dodge Dakota Front Outer CV Axle Shaft Driver or Passenger Side TRQ CSA82133
2001Dodge Durango Dodge Durango Front Outer CV Axle Shaft Driver or Passenger Side (Built After 9/11/00 Production Date) TRQ CSA82133
2002-2003Dodge Durango Dodge Durango Front Outer CV Axle Shaft Driver or Passenger Side TRQ CSA82133
Part #: 1AACV00079


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82133

How-to Video:

(09:34 min)