Dodge Dakota Durango CV Axle Shaft Pair TRQ CSA82555 - 1AACS00201

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

For quality fit, finish, and easy installation.

For longer-lasting life and consistent performance under different road conditions.

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Remove the wheel and remove the brakes. (1:00)

• Loosen your lug nuts
• Raise and secure the car.
• Remove the lug nuts and wheel.
• Unbolt the caliper and secure it up with a wire tie
• Remove the rotor and set aside.

step : Remove the axle (2:10)

• Remove the cotter pin
• Put the wheel back on and lower the car.
• Use a 32 mm socket and breaker bar to remove the hub nut.
• Raise and secure the car again and remove the wheel.
• Give the axle a good rap with a hammer to loosen it.
• Remove the bolts mounting the axle.
• Pull out the axle.