Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Dodge Dakota or Durango corner parking light is just what you need to get your Dodge in good looking form again!

Specifications:

  • LH (Driver Side)
    • Mounts below and beside the headlight
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

This Dodge Dakota or Durango parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Parking Light (1:11)
    • Pull the rubber lighting gasket off of its pins
    • Remove the T10 Torx screw at the bottom of the headlight
    • Pull the parking light out by hand
    • Twist the parking light bulbs
    • If necessary, replace the bulbs
  2. step : Installing the New Parking Light (2:28)
    • Insert the bulbs into the new parking light
    • Twist the bulbs in to secure them
    • Push the parking light up and to the side against the headlight
    • Make sure the parking light bracket teeth clip into place
    • Insert the T10 Torx Screw
    • Stretch the gasket back on to the pins
    • Close the hood slowly, while pushing the gasket in

Tools needed for replacement:

    Torx Drivers & Sockets

  • T10 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2004Dodge Dakota Dodge Dakota Corner Light Driver Side
1998-2003Dodge Durango Dodge Durango Corner Light Driver Side
Part #: 1ALTL00122


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:04 min)