Replaces

Dodge Dakota Durango Brake Rotor Pair Nakamoto 5382-DSZ - 1APBR00056

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

These performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part number: 52009208
  • Fits 6 lug wheels
  • 11.33" (288mm) diameter
  • Fits 2WD & 4WD Models

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug
  • Front Brake Rotor Specifications: 11.34" (288mm)
  • Product Line: Performance

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Front Wheel (1:10)
    • Begin with your vehicle on the ground so the tires won't move
    • Using your 19mm socket and ratchet, or a lug wrench, loosen the lug nuts
    • Jack up the car using a lift or a floor jack and stands
  2. step : Removing the Brake Caliper (1:33)
    • Turn the wheels to the left by pushing on the passenger side wheel
    • Remove the two T47 Torx bolts
    • Then take your flat blade screwdriver and pry a little bit on the caliper and get it going
    • Pull your caliper right off
  3. step : Removing the Brake Pads and the Rotor (2:40)
    • For the inner pad, you should be able to simply pull it out
    • To get the outer one out, you use your hammer and you want to hit diagonally and they come out
    • Place the caliper above and secure it with a wire-tie or something similar. You don't want to just let it hang down because there is a chance you can rupture your hose.
    • With the caliper out of the way, simply remove the rotor
  4. step : Replacing the Brake Rotor (3:25)
    • Put the brake rotor back on and then you want to push your piston back in to your caliper
    • As you tighten the C-Clamp, the piston goes down in to the caliper
    • Remove the C-clamp
  5. step : Replacing the Brake Pads (4:01)
    • Your inner pad has the clamps to secure-just put in to the caliper and push it in
    • Your outer pad goes right in. While making sure you have your bolts out of the way, you push them down like that with the caliper right in
    • After the caliper is in, start your bolts back in and, once again, that's a T47 Torx
    • Push on your bolts and start them
    • Tighten up these bolts to about 35 pounds
  6. step : Replacing the Front Wheel (5:57)
    • Replace the wheel into the vehicle. Use the air wrench to start the lug nuts a little bit, and you want to torque your lug nuts to about 100 foot pounds
    • Make sure that before you drive your car, you get in and pump the brake pedal a few times until you make it feel solid
    • When you push the piston back in to the caliper you'll need to work it back against the discs
    • Before you road test your vehicle, just make sure that the brakes are holding the car in gear
    • Do a stop from 5 mph and 10 mph just to make sure that everything is working before you get it out on the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Good for the price you pay came good quality package arrived really fast something I would buy again
March 9, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2002Dodge Dakota Dodge Dakota Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
1998-2002Dodge Durango Dodge Durango Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00056


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 5382-DSZ

How-to Video:

(07:04 min)