Replaces

Dodge Chrysler Ram Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit - 1APBS00007

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      13.19 in. (335mm)
      5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Brake Pad Lubricant Included:   Includes Brake Pad Contact Point Grease
  • Brake Pad Hardware Included:   Includes Brake Pad Hardware
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fits 5 Stud Wheel
  • 13.2" (336mm) Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:45)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Removing the Brake Pads (1:07)
    • Turn the wheel by hand or with the steering wheel
    • Use a flat blade screwdriver or pry bar to push the brake pistons in
    • Remove two 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Inspecting the Brakes (2:45)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  4. step : Removing the Brake Rotor (3:23)
    • Remove two 22mm bolts from the brake caliper bracket using a breaker bar or pipe for leverage
    • Pull off the brake caliper bracket
    • Loosen up the brake rotor by tapping it with a hammer
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    • Remove the lug nuts and slide off the rotor
  5. step : Installing the New Brakes (6:04)
    • Slide the rotor on
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the 22mm bolts by hand
    • Tighten the 22mm bolts preliminarily
    • Tighten the 22mm bolts to 110 foot-pounds of torque
    • Install the new brake pads into the bracket with the wear indicator on the top side
    • Push the caliper slides out
    • Put the caliper on starting with the bottom tab
    • Thread the 13mm bolts by hand
    • Tighten bolts to between 20-22 foot-pounds
  6. step : Reattaching the Wheel (10:12)
    • Turn the wheel straight by hand or with the steering wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100-120 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (10:58)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Large Hammer
  • Wire Brush
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 22mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007-2009Dodge Durango Dodge Durango Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2006Dodge Ram 1500 Truck Dodge Ram 1500 Truck (excluding SRT-10 & Mega Cab) Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Quad Cab Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2007-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Regular Cab Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
2011-2016Ram 1500 Truck Ram 1500 Truck Front Premium Posi Semi-Metallic Cross Drilled & Slotted Premium G-Coated Performance Brake Kit
Part 1APBS00007
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12045