1ASTS01016-Dodge Chrysler Plymouth Front Driver Side Strut & Spring Assembly

Replaces

Dodge Chrysler Plymouth Front Driver Side Strut & Spring Assembly TRQ

1ASTS01016
FREE SAME DAY SHIPPING
Save 36%
List: $148.95 Save: $53.00
Part 1ASTS01016
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57599

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Replacing struts use to require specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut & spring assemblies make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut

Install Tip: To keep your vehicle operating safely and as designed:

  • Replace your shocks & struts in pairs. This will avoid mixing parts (old and new or brands). Mixing parts can cause variations in movement between the vehicle’s body and wheel, resulting in handling irregularities.
  • Have an alignment performed after replacing your shocks and struts this will ensure proper tracking and protect your vehicle’s tires from premature wear.

 

Easy install - Pre-assembled, loaded struts
No specialty tools required

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Detaching the Strut (0:43)
    • Open the trunk
    • Pull back the trunk insulation
    • Pull off the strut cover
    • Remove the two 15mm nuts from the top of the strut
    • Raise and secure the vehicle
    • Apply penetrating oil to the lower strut bolt and nut
    • Remove the 18mm nut from the strut
    • Tap the strut bolt through with a hammer and pick
    • Remove the two plastic clips from the top of the strut
  2. step : Removing the Wheel (2:10)
    • Lower the vehicle to the ground
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Strut (2:30)
    • Pry off the strut with a pry bar
    • Pull the strut down and out over the wheel
  4. step : Installing the New Strut (2:44)
    • Put the new strut into place over the wheel
    • Pull down the wheel as you push the strut into place
    • Position the strut with a pry bar
    • Hammer the bolt into the strut
    • Fasten the 18mm nut onto the strut bolt
    • Tighten the nut to between 75 - 80 foot-pounds
    • Insert the plastic clips into the top of the strut
  5. step : Reattaching the Wheel (4:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
  6. step : Reattaching the Strut (4:09)
    • Fasten the two 15mm nuts onto the top of the strut
    • Tighten the 15mm nuts to between 40 - 45 foot-pounds
    • Replace the strut cover
    • Put the trunk insulation back into place
  7. step : Fastening the Wheel (4:37)
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Pick

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench


Fits the following Makes:

Year Make Model Description
1999-2000Chrysler Cirrus Chrysler Cirrus Front Driver Side Strut & Spring Assembly
2001-2006Chrysler Sebring Chrysler Sebring Convertible Front Driver Side Strut & Spring Assembly
2001-2006Chrysler Sebring Chrysler Sebring Sedan Front Driver Side Strut & Spring Assembly
1999-2000Dodge Stratus Dodge Stratus Front Driver Side Strut & Spring Assembly
2001-2006Dodge Stratus Dodge Stratus Sedan Front Driver Side Strut & Spring Assembly
1999-2000Plymouth Breeze Plymouth Breeze Front Driver Side Strut & Spring Assembly

Part Interchange

Brand Label Part Number
DIY Solutions SHO01741
Monroe 171565L
Monroe Shocks & Struts 171565L

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57599
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Plymouth Front Driver Side Strut & Spring Assembly TRQ-1ASTS01016 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.