1ASFK03262-Dodge Chrysler Mitsubishi Eagle Steering & Suspension Kit 8 Piece Set


1996 Chrysler Sebring Coupe Steering & Suspension Kit 8 Piece Set

Guaranteed to fit: 1996 Chrysler Sebring

Fit Details

  • Body Type: Coupe

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Lower Rearward Control Arms with Ball Joints
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 8 Piece Set

This part replaces:

  • Dorman 520-347
  • Dorman 520-348
  • Hollander 512-58543R 515-58303R -58545R
  • Hollander 512-58546L 512-58544L -58303L
  • Moog K90264
  • Moog K80437
  • Moog K80436
  • Moog ES2347RL
  • Moog EV350
  • OE # MR594674
  • OE # MR296319
  • OE # MR296290
  • OE # MR296289
  • OE # MB912512
  • OE # MR403872
  • OE # MR162582
  • OE # MB912511
Save 36%
List: $170.95 Save: $61.00
Only 1 left in stock
Part 1ASFK03262
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA59213

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Lower Rearward Control Arms with Ball Joints
      (2) Front Upper Ball Joints
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:35)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (0:59)
    • Turn the wheels by hand for better access to the tie rod
    • Remove the cotter pin from the outer tie rod with pliers
    • Remove the castle nut from the tie rod with an adjustable wrench
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Loosen the nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the outer tie rod
    • Lift the outer tie rod out of the wheel knuckle
    • Twist off the outer tie rod
  3. step : Removing the Inner Tie Rod (1:59)
    • Twist off the nut that connects the outer to the inner tie rod
    • Pull the small boot clamp off the inner tie rod with pliers
    • Pry off the large boot clamp with a hammer and a flat blade screwdriver
    • Pull off the boot
    • Remove the inner tie rod with a pipe wrench
  4. step : Installing the New Inner Tie Rod (2:46)
    • Twist the new inner tie rod into place
    • Put a wire tie on the large end of the boot
    • Put the boot into place
    • Tighten the wire tie
    • Push on the small boot clamp with pliers
    • Twist on the nut that connects the outer to the inner tie rod
  5. step : Reinstalling the Outer Tie Rod (3:43)
    • Twist your outer tie rod onto the inner tie rod
    • Measure the distance from the inner tie rod to the end of the outer tie rod
    • This should be the same measurement as noted in Step 2
    • Thread the nut that connects the outer to the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Line up the castle nut with the cotter pin hole
    • Push the cotter pin into place
    • Twist the cotter pin into place with pliers
    • Tighten the nut that connects the outer to the inner tie rod
    • Fill the outer tie rod bearing with bearing grease, using a grease gun
  6. step : Reattaching the Wheel (4:56)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Pipe Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Grease Gun

Fits the following Makes:

Year Make Model Description
1995Chrysler Sebring Chrysler Sebring Steering & Suspension Kit 8 Piece Set
1996-2000Chrysler Sebring Chrysler Sebring Coupe Steering & Suspension Kit 8 Piece Set
1995-2000Dodge Avenger Dodge Avenger Steering & Suspension Kit 8 Piece Set
1995-1998Eagle Talon Eagle Talon Front Wheel Drive Steering & Suspension Kit 8 Piece Set
1995-1999Mitsubishi Eclipse Mitsubishi Eclipse Front Wheel Drive Steering & Suspension Kit 8 Piece Set
1994-1998Mitsubishi Galant Mitsubishi Galant Front Wheel Drive Steering & Suspension Kit 8 Piece Set

Part Interchange

Brand Label Part Number
Beck / Arnley 1015541
Beck / Arnley 102-5540
Beck / Arnley 101-5540
Beck / Arnley 101-5541
Beck / Arnley 102-5541
Beck / Arnley 1015540
Beck/Arnley 102-5540
Beck/Arnley 101-5541
Beck/Arnley 1015541
Beck/Arnley 102-5541
Beck/Arnley 101-5540
Beck/Arnley 1015540
Centric Parts 623.46001
Centric Parts 623.46002
Chrysler MR296319
Chrysler MR296290
Chrysler MR296292
Chrysler MR296320
Chrysler MR296289
Chrysler MB912511
Chrysler MR208667
Chrysler MR296291
Chrysler mr208670
Chrysler mr208669
Chrysler MB912512
Chrysler MR208668
DIY Solutions SUS00316
DIY Solutions SUS05352
DIY Solutions SUS07370
DIY Solutions SUS05353
DIY Solutions SUS07434
Delphi TC1583
Delphi TC1582
Dorman 520-348
Dorman 520-347
Dorman - OE Solutions 520-347
Dorman - OE Solutions 520-348
Dorman OE Solutions 520-348
Dorman OE Solutions 520-347
Falcon CA381
Falcon CA380
Falcon Steering Systems FCA380
Falcon Steering Systems FCA381
Ingalls Engineering CAK80436
Ingalls Engineering CAK80577
MAS Industries CB30824
MAS Industries CB30825PR
MAS Industries CB30824PR
MAS Industries CB30825
MOOG K90264
MOOG K80437
MOOG K80576
MOOG CK80577
MOOG CK80437
MOOG CK80576
MOOG RK80577
MOOG RK80576
MOOG RK80437
MOOG CK80436
MOOG RK80436
MOOG K80577
MOOG K80436
MOOG Chassis Products ES2347RL
MOOG Chassis Products EV350
MOOG Chassis Products K80577
MOOG Chassis Products K80436
MOOG Chassis Products CK80576
MOOG Chassis Products RK80577
MOOG Chassis Products CK80436
MOOG Chassis Products K80576
MOOG Chassis Products RK80436
MOOG Chassis Products CK80437
MOOG Chassis Products K80437
MOOG Chassis Products RK80437
MOOG Chassis Products CK80577
MOOG Chassis Products K90264
MOOG Chassis Products RK80576
Mcquay-Norris FA4132
Mcquay-Norris FA4131
Mevotech GS9956
Mevotech MS9956
Mevotech CMS9878
Mevotech MS9879
Mevotech GS9879
Mevotech MS9878
Mevotech MS9957
Mevotech GS9957
Mevotech CMS9956
Mevotech RMS9879
Mevotech GS9878
Mevotech RMS9878
Mevotech CMS9879
Mitsubishi MR162581
Mitsubishi MR162582
Mitsubishi MR296290
Mitsubishi MB912511
Mitsubishi MR594674
Mitsubishi MR296319
Mitsubishi MR296289
Mitsubishi MB912512
Mitsubishi MR403872
NAPA Premium 2605257
NAPA Premium 2605257M
NAPA Premium 2605258M
NAPA Premium 2605258
NAPA Premium 2608115
Precision Driveline CB25017
Precision Driveline 4CB80010
Precision Driveline CB25016
Precision Driveline CB80009
Precision Driveline CB80010
Precision Driveline 4CB80009
Raybestos Chassis 507-1129
Raybestos Chassis 507-1130
SYD 1506016
SYD 1506017

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA59213
Product Reviews
5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great quality
This kit is excellent. A great price for parts for my 1999 Eclipse. The shipping was very quick, so that I could get started.
August 13, 2017
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chrysler is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Chrysler or FCA US LLC. See all trademarks.

Dodge Chrysler Mitsubishi Eagle Steering & Suspension Kit 8 Piece Set TRQ PSA59213-1ASFK03262 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1996 Chrysler Sebring with these options.