Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20-plus six years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be replacing a mirror on this 2003 Chrysler Voyager. Same procedure as any 2001-2007 Caravan, Voyager, and Town and Country. The only tools you'll need are a T27 Torx driver and a small flat blade screwdriver.
Okay, you have your voyager set. Your mirror wants to fight with a garage puller or something like that and you need to replace it. So, pretty easy. Take your little screwdriver here, about an inch down. Work it in between and that starts to pull out like that. Okay, then you actually pull... let's put the screwdriver down here. Keep your fingers on in there and you kind of work this up, pull it up and off.
Okay, we'll put that right there. Here's that T27 Torx screwdriver and there's two screws right here. We'll remove those and then the last screw ... I'll hold it up here to show you and right here your last torque screw, okay? It's right in there. So, you remove those three screws and the mirror comes off. I've taken out this screw and the bottom screw. I'll just pull this last one out. Okay, you can see it comes right off. Okay, so you can see this is a new mirror from 1A Auto and this is the original mirror. You can see that it's going to bolt right up there, no problem. There's a nice thick foam gasket. Upside down but, you know, everything looks the same. The mirror that I grabbed is a power heated mirror and this van has manual. If you did have a power mirror obviously you need to unplug it as you pull it out. You can see there's a little front tab so you want to press down on that and then work it out the harness that's in the vehicle.
The new aftermarket, it's all designed the same way. It has the plate that would snap in place, it all looks the same. It looks just like the original, okay. Now we are going to put this original one back on because this van doesn't need a replacement. Just trying to illustrate how you do it. Okay, we'll take the mirror and you want to put it down in behind the fender here. I generally start with this top one first. Just get it in there started then we'll get the other two and get it started. Then we'll tighten it up.
I've got my screw bolts in and as you tighten up, kind of hook it up into place. We'll tighten that up. I'll push that a little bit. We'll tighten that up. Down here another one, tighten that one up. Then we'll close this door and then, same thing, slide this down into place. Okay, that goes in. Oops, I missed this one so pull it out here. It's not going to be perfect every time for sure. Now, I've got it in place. There we go.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the Internet. Feel free to call us toll free 888-844-3393, the company that's here for you in the Internet and in person. Thank you.
