Replaces

Dodge A/C Condenser Cooling Fan Assembly - 1AACF00104

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our aftermarket A/C condenser fan assemblies are some of the highest quality replacements on the market! This AC condenser cooling fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • Shroud designed to ensure structural integrity and endurance for maximum performance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation
  • Replaces dealer part number: 68004163AA

Now you can buy a high quality AC Condenser cooling fan motor assembly that is built to strict quality control standards. This cooling motor assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the battery (1:09)
    • Disconnect the negative battery terminal
    • Carefully disconnect the positive battery terminal
    • Use a 10 mm socket and ratchet to do this.
    • Remove the battery harness, take care not to drop the harness into the engine bay!
    • Disconnect the negative battery cable clip with your 10 mm socket and ratchet.
    • Lift the battery out.
  2. step : Move the fuse relay center aside (2:40)
    • Unbolt the 13 mm bolt and the Phillips push clip.
    • Slide the relay center towards the engine and then pull it aside towards where the battery was.
    • Use wire ties to fasten the fuse relay center out of the way.
  3. step : Remove the AC Condenser fan (3:42)
    • Remove the four bolts securing the radiator.
    • Remove the two push clips.
    • Unclip the AC line.
    • Unbolt the Condenser fan from the assembly with your 10 mm socket and ratchet.
    • Cut the fan shroud so you can remove the condenser out of the assembly.
    • Move the condenser assembly so you can finesse the fan out.
    • Swap the mounts from the old fan to the new one.
    • See part two for reassembly.

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket

3.87/ 5.0
15 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
2
0
3
Shroud does not fit the condenser unit.
I had to remove the fan motor and use the old shroud and fan. So in buying the unit I spent more than I needed to. I suggest just buying the motor. If your fan is damaged go for original equipment parts.
January 22, 2017
Installation video encouraged me to order fro 1a auto
Part was a direct fit. Price was one of the best. Videos are professional and well done.
February 7, 2017
Woolks geat
Easy installation works great. Have not had any issues with product.
February 14, 2017
Fast and direct replacement
Was shipped same day, and mounted with ease after some modifications around the dodge ac line to avoid evac of the ac. Great product and great service! Definately recommended to others!
May 10, 2017
Works good but tricky to install without professional equipment
This part is almost identical to the OE Part. The only difference is the shape of the fan blades. If you are installing this yourself without the proper a/c charging and discharging tool, you will need to modify this part by cutting the plastic around the a/c lines. These parts are designed to be changed by evacuating the freon system and unbolting one if the lines. Examine your current set up and you notice what I mean. All in all its a pretty simple change.
June 16, 2017
2008 Dodge A/C Condenser Cooling Fan Assembly (poor quality)
I purchased the fan assembly because the OEM unit failed after 9 years service & over 100K miles, and I hoped to save some money by purchasing an aftermarket part and installing myself. While the 1A installation videos were helpful, the appearance of a quality product quickly faded after starting the truck with 1A fan installed. A severe vibration could be felt, so I drove truck to local Dodge dealership and paid to have diagnostics performed, thinking it had an unrelated issue. Much to my dissatisfaction, dealership shop confirmed the vibration was coming from the new 1A fan assembly; and stated it was due to unbalanced fan blades from manufacturer. I asked them to check if I had installed 1A unit correctly, which they did confirm. The new 1A unit "functions", but still vibrates severely, so I would not recommend this unit.
June 27, 2017
It works fine thanks
Thanks 1 aauto .com put it on the same day I got it ??????
June 29, 2017
Works great...
Great replacement for a great price. Saved me over 400$ in labor and parts from a "Professional AC shop" Discovered you guys on youtube... Thanks for the vids and the affordable prices!
July 6, 2017
Dissatisfied
the new part was disaster, wrong part was send after giving all vehicle info. it will cost too much for returning it so it will go in the trash and shop somewhere else
July 13, 2017
Its good to be Cool!
I received the parts ahead of schedule and installed them the day they arrived using the videos from your website. They both work great and my AC is blowing cold again. Its good to be cool! Thanks!!
July 24, 2017
Fit great!
Item arrived quickly and installed easier than in video. Very happy with my purchase!
August 29, 2017
Fan
I had to modify it to make it fit and it is a pain to put in without completely removing the condenser but it is possible to do it. Working good so far.
August 30, 2017
Condenser Fan Motor
The A.C. quit working on my 2006 Ram, only at stop lights. I figured out the condenser fan motor wasnt turning on. I watched the video on 1A Autos YouTube video page, bought their fan and installed it. It fit perfectly and the video was awesome!
September 14, 2017
It was Great 1!!!!!! The You tube video was a big help Thanks so much. Michael Royer
February 15, 2018
Condenser cooling fan
I installed the condenser fan exactly as the video showed on one a auto on YouTube it was easy to put in I also loosened the slam plate to move the fan into position it gave more room everything works fine I am very happy with the product I will buy from a auto in their future check out the videos good stuff Write your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
June 4, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck V8 4.7L A/C Condenser Cooling Fan Assembly
2002-2003Dodge Ram 1500 Truck Dodge Ram 1500 Truck V8 5.9L A/C Condenser Cooling Fan Assembly
2002-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck V6 3.7L A/C Condenser Cooling Fan Assembly
2003-2007Dodge Ram 2500 Truck Dodge Ram 2500 Truck A/C Condenser Cooling Fan Assembly V8 5.7L
2003-2007Dodge Ram 3500 Truck Dodge Ram 3500 Truck A/C Condenser Cooling Fan Assembly V8 5.7L
Part #: 1AACF00104


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:15 min)