Specifications:

  • Brand new components, not rebuilt
  • 1 3 pin oval connector
  • Complete unit including ignition module, cap, and rotor
  • Factory style plastic shaft
  • Improved steel bearings for better longevity
  • Better heat resistant ignition module
  • 100% tested
  • No core charge

All components are marked and verified as NEW.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (0:33)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Air Intake (0:53)
    • Loosen the throttle body thumbscrew by hand
    • Disconnect the breather hose from the throttle body
    • Disconnect the mass airflow sensor
    • Disconnect the intake air temperature sensor
    • Label the sensors with painter's tape and a marker
    • Unclip the air box tabs
    • Lift off the air box cover
    • Pull the air intake up and out
  3. step : Removing the Distributor Cap (1:37)
    • Pull the spark plug wires off the spark plugs
    • Unclip the wiring retainers with a flat blade screwdriver
    • Disconnect the spark plug wire from the ignition coil
    • Remove the two T20 Torx screws from the distributor
    • Lift the distributor cap up and out
  4. step : Setting the Engine Timing (3:03)
    • Make sure the engine is at top dead center compression
    • Attach a 16mm socket and ratchet to the crankshaft pulley bolt
    • Turn the crankshaft clockwise until the notch lines up with the notch on the timing cover
    • Make sure both lifters for cylinder one are down
  5. step : Removing the Distributor (5:39)
    • Loosen the 13mm bolt from the distributor hold-down plate
    • Remove the hold-down plate from the distributor
    • Disconnect the distributor electrical connector
    • Pull the distributor up and out
  6. step : Preparing the New Distributor (6:17)
    • Remove the two T20 torx screws from the new distributor cap
    • Separate the new cap from the new distributor
    • Remove the two T10 Torx screws from the distributor rotor
    • Remove the rotor from the distributor
    • Line up the 8 on the on distributor with the notch on the housing
  7. step : Installing the Distributor (7:46)
    • Set the distributor into place with the flat part of the housing facing the engine
    • Start the 13mm bolt into the distributor hold-down
    • Install the rotor onto the distributor
    • Tighten the two T10 bolts for the rotor
    • Connect the distributor electrical connector
  8. step : Installing the Distributor Cap (9:03)
    • Put the distributor cap into place
    • Fasten the two T20 screws into the distributor cap
    • Connect the spark plug wire to the ignition coil and the distributor
    • Remove the spark plug wires from the old distributor
    • Install the spark plug wires onto the new distributor in the same order
    • Connect the wires to the spark plugs in the correct order
    • Clip the wires into their retainers
  9. step : Connecting the Battery (10:50)
    • Reconnect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    General Tools

  • Flashlight

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 16mm Socket
  • 13mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T20 Torx Driver

  • Wrenches - Metric

  • 16mm Wrench
  • 8mm Wrench
  • 13mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Excellent
Distributor fit and is working great. Installation was relatively easy following the instruction video.
December 5, 2017
Purchased
3 months ago
Distributor
Shipped very fast. Worked really great. Very good price l would highly recommend this product
November 28, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
DOES THIS COME WITH THE CAM SENSOR?
TOM P on Feb 15, 2016
BEST ANSWER: MIne did not had no problems to install although had engine light come on so removed it turned 180 degrees and re installed all good no problems since

How-to Video:

(11:09 min)

Tools List:

    General Tools

  • Flashlight

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 16mm Socket
  • 13mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver
  • T20 Torx Driver

  • Wrenches - Metric

  • 16mm Wrench
  • 8mm Wrench
  • 13mm Wrench



This part replaces:

  • OE # 1103977, 1104051, 1104058, 1104079, 12570425
  • Hollander 606-02373
  • Hollander 606-02357

Vehicle Fit

  • 1999-2000 Cadillac Escalade Distributor
  • 1996-1999 Chevy C1500 Truck Distributor V8 5.7L
  • 1996-1999 Chevy C1500 Truck Distributor V8 5.0L
  • 1996-2000 Chevy C2500 Truck Distributor V8 5.7L
  • 1996-1998 Chevy C2500 Truck Distributor V8 5.0L
  • 1996-2000 Chevy C3500 Truck Distributor V8 5.7L
  • 1996-2002 Chevy Express 1500 Van Distributor V8 5.0L
  • 1996-2002 Chevy Express 1500 Van Distributor V8 5.7L
  • 1996-2002 Chevy Express 2500 Van Distributor V8 5.0L
  • 1996-2002 Chevy Express 2500 Van Distributor V8 5.7L
  • 1996-2002 Chevy Express 3500 Van Distributor V8 5.7L
  • 1996-1999 Chevy K1500 Truck Distributor V8 5.0L
  • 1996-1999 Chevy K1500 Truck Distributor V8 5.7L
  • 1996-1998 Chevy K2500 Truck Distributor V8 5.0L
  • 1996-2000 Chevy K2500 Truck Distributor V8 5.7L
  • 1996-2000 Chevy K3500 Truck Distributor V8 5.7L
  • 1996-1999 Chevy Suburban C1500 Distributor V8 5.7L
  • 1996-1999 Chevy Suburban C2500 Distributor V8 5.7L
  • 1996-1999 Chevy Suburban K1500 Distributor V8 5.7L
  • 1996-1999 Chevy Suburban K2500 Distributor V8 5.7L
  • 1996-2000 Chevy Tahoe Distributor V8 5.7L
  • 1996-1999 GMC C1500 Truck Distributor V8 5.7L
  • 1996-1999 GMC C1500 Truck Distributor V8 5.0L
  • 1996-2000 GMC C2500 Truck Distributor V8 5.7L
  • 1996-1998 GMC C2500 Truck Distributor V8 5.0L
  • 1996-2000 GMC C3500 Truck Distributor V8 5.7L
  • 1996-1999 GMC K1500 Truck Distributor V8 5.7L
  • 1996-1999 GMC K1500 Truck Distributor V8 5.0L
  • 1996-2000 GMC K2500 Truck Distributor V8 5.7L
  • 1996-1998 GMC K2500 Truck Distributor V8 5.0L
  • 1996-2000 GMC K3500 Truck Distributor V8 5.7L
  • 1996-2002 GMC Savana 1500 Van Distributor V8 5.0L
  • 1996-2002 GMC Savana 1500 Van Distributor V8 5.7L
  • 1996-2002 GMC Savana 2500 Van Distributor V8 5.0L
  • 1996-2002 GMC Savana 2500 Van Distributor V8 5.7L
  • 1996-2002 GMC Savana 3500 Van Distributor V8 5.7L
  • 1996-1999 GMC Suburban C1500 Distributor V8 5.7L
  • 1996-1999 GMC Suburban C2500 Distributor V8 5.7L
  • 1996-1999 GMC Suburban K1500 Distributor V8 5.7L
  • 1996-1999 GMC Suburban K2500 Distributor V8 5.7L
  • 1996-2000 GMC Yukon Distributor V8 5.7L
Part #: 1AEDI00024

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More