Replaces

Chevy GMC Buick Olds Isuzu Saab Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129 - 1AACV00146

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:22)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:49)
    • Pry the brake pads in with a flat blade screwdriver to push in the pistons
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry out the brake pads with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:20)
    • Remove two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not pull off thread two M10 by 7cm bolts into the threaded holes
    • For more detailed instructions, please see the 2004 Trailblazer rear brake replacement video
  4. step : Accessing the Differential (3:31)
    • Have a drain pan ready
    • Remove all but two bolts from the differential cover
    • Drain the differential fluid
  5. step : Removing the Axle (4:20)
    • Put the vehicle into neutral
    • Turn the driveshaft by hand until you can access the differential bolt
    • Remove the 5/16 inch bolt from the differential
    • Pull the clip from the differential
    • Slide out the differential pin
    • Push the axle inward by hand
    • Pull out the small C-clamp from the differential
    • Pull the axle out by hand
  6. step : Installing the New Axle (5:58)
    • Slide the axle in being sure not to drag against the seal
    • Install the C-clamp onto the axle with the grooved side toward the center
    • Push the axle out by hand
    • Line the gears up by hand
    • Insert the differential pin
    • Start the 5/16 inch bolt into the differential
    • Apply thread locking fluid to the 5/16 inch bolt
    • Tighten the 5/16 inch bolt to between 8 -10 foot-pounds of torque
  7. step : Reinstalling the Differential Cover (8:28)
    • Clean the mounting area with a cloth rag
    • Clean the differential cover with a cloth rag
    • Apply sealant to the gasket cover
    • Put the gasket and differential cover into place
    • Start two bolts into the differential cover by hand
    • Start the remaining bolts
    • Tighten the bolts to about 12 foot-pounds
  8. step : Refilling the Rear End (9:50)
    • Remove the differential plug with a 3/8 inch drive ratchet
    • Fill the differential with 80w-90 gear oil, until fluid begins to leak out
    • Put the plug back in and tighten it
    • Clean grease off the rear end
  9. step : Reinstalling the Brake Rotor (10:35)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts
  10. step : Reinstalling the Brake Pads (11:02)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the 14mm bolts
  11. step : Reattaching the Wheel (11:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  12. step : Testing the Brakes (12:05)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Floor Jack
  • Funnel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Gasket Adhesive
  • Gear Oil
  • Liquid Thread Locker
  • M10 x 7cm bolts

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Sockets - SAE

  • Complete SAE Socket Set

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Fantastic
Unfortunately I was not able to install it myself because I had no time with my boys. However it has been on the trailblazer for a week now and it is quiet and smooth. Great product.
September 17, 2017
New Front axle shaft
I found the part to be as advertised however the one piece, that is the axle nut, does not include the integrated washer that is part of the original axle nut. I felt uncomfortable using the new one so I broke the rule and reused the original.
October 10, 2017
Front axle
Front axle work perfect love the video Will recommend to friends
May 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2002-2009Chevy Trailblazer Chevy Trailblazer Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2002-2009GMC Envoy GMC Envoy Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2002-2006GMC Envoy XL GMC Envoy XL Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2004-2005GMC Envoy XUV GMC Envoy XUV Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2003-2008Isuzu Ascender Isuzu Ascender Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2002-2004Oldsmobile Bravada Olds Bravada Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
2005-2009Saab 9-7X Saab 9-7X Front Driver or Passenger Side CV Axle Shaft TRQ CSA82129
Part 1AACV00146
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82129