CV Axle Shaft TRQ CSA82127 - 1AACV00147

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


Updated Design: While this part may look different from the one originally installed on your vehicle, it is guaranteed to fit and operate as well or better.

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:03)
    • Remove the lug cap
    • Loosen the lug nuts.
    • Remove the cover and cotter pin from the hub nut and loosen the hub nut.
    • Loosen the seven 13 mm 12 point bolts securing the axle to the front drive.
  2. step : Disconnect the stabilizer link (1:55)
    • Hit them with penetrating oil
    • Use a 14 mm socket and 9/16 socket on the bottom to remove the stabilizer link.
    • This might take a bit of elbow grease with hand tools, but it will come loose.
    • Use a hammer to drive out the stabilizer link.
  3. step : Remove the half shaft of the CV axle. (3:38)
    • Use a large crow bar between the lug bolts to secure the axle while you remove the 13 mm 12 point bolts if you didn't loosen them earlier.
    • Remove the hub nut.
    • Give the axle a good tap with the hammer to break it loose from the steering knuckle.
    • Pull the axle out.
  4. step : Install the new half shaft of the CV axle (5:23)
    • Install the grease fitting on the ball joint and fill with grease.
    • Put the new axle in and bolt in.
    • In a star pattern, torque the 13 mm 12 point bolts to 60 ft lbs.
  5. step : Install the new stabilizer link. (6:20)
    • Thread the bushings and washers on the stabilizer bar and tighten the lock nuts down.
    • Jack up the suspension a bit and tighten the stabilizer link up to 15-17 ft lbs.
  6. step : Put your hub and lug nuts and wheel back on. (7:20)
    • Put the hub nut on and pre-tighten but don't torque it.
    • Put the wheel and lug nuts back on
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Torque the hub nut to 220 ft lbs.
    • Replace the cotter pin and cover on the hub nut.
    • Put the lug cover back on.

Tools needed for replacement:

    General Tools

  • Center Punch
  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 35mm Socket

  • Sockets - SAE

  • 9/16 Inch Socket

4.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Ford Expedition cv axle shaft replacemant
Fast shipping, item exactly as described, perfect fit, followed the video instruction from teardown to installation of the new part and job was completed without any problems. Will definitely order more parts and I highly recommend your store.
November 2, 2017
CV Axle
The CV axle is working fine, solved a vibration problem I was having at 55 MPH and above. Only time will tell regarding the longevity of this part. The CV Axle I had to replace (OReilly Auto) only lasted 40K miles, while the OEM (Ford F-150) axle lasted 240K miles. I hope to get far more than 40K miles on the 1A-Auto axle. KG
November 5, 2017
Best price Anywhere!
Received this part quickly. Used their on site part matcher to make sure we got the right part, worked perfectly. Only potential issue I saw the part was not drilled for a kotter key like the original was. May not be a problem. New part went on a lot easier than the old one came off. I would recommend, and expect to make many future purchases from th hem myself.
November 20, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I am replacing two new axles recently installed that are binding. Will this perform as intended regardless of the angle?
Tom S July 2, 2018
If this is listed to fit your vehicle, it will fit as the original did.
Peter M July 2, 2018
Much thanks
Tom S July 2, 2018
Year Make Model Description
1997-2002Ford Expedition Ford Expedition Front CV Axle Shaft Driver or Passenger Side TRQ CSA82127
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Front CV Axle Shaft Driver or Passenger Side TRQ CSA82127
1997-2003Ford F150 Truck Ford F150 Truck Front CV Axle Shaft Driver or Passenger Side TRQ CSA82127
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Front CV Axle Shaft Driver or Passenger Side TRQ CSA82127
1998-2002Lincoln Navigator Lincoln Navigator Front CV Axle Shaft Driver or Passenger Side TRQ CSA82127
Part #: 1AACV00147

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82127

How-to Video:

(08:53 min)