Specifications:

  • Fits LH (Driver Side) FRONT
  • Approximate Dimensions:
    • Height: 5.00 inches
    • Length: 29.5 inches
    • Width: 5.00 inches
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle (1:50)
    • Remove the hub nut
    • Hit the axle with a hammer
    • Remove the two 21mm bolts at the bottom of the strut with a piece of pipe for leverage
    • Hammer the bolts out
    • Place a drip pan underneath the axle
    • Pry from the back of the axle with a pry bar and hammer
    • Hammer the axle again to loosen it
    • Pull the wheel knuckle forward
    • Pull the axle free and move it to the side
    • Hit the axle out of the wheel knuckle with a hammer
    • Pull the axle up and out
  3. step : Installing the Axle (3:40)
    • Push the axle into place
    • Push the wheel knuckle onto the axle and push the axle into place
    • Place the wheel knuckle into the strut and replace the two 21mm bolts
    • Torque the 21mm strut bolts to 130 foot-pounds
    • Replace the hub nut
  4. step : Reattaching the Wheel (5:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 foot-pounds
    • Torque the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. step : Checking the Oil (6:06)
    • Start the car to warm up the transmission
    • Pull out the dipstick
    • Wipe the dipstick clean
    • Recheck the dipstick
    • Replace the amount of oil you need
    • Check the dipstick again

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Transmission Fluid

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 35mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
No Problems at all
Fast delivery quality part eliminated the noise that was in the car
August 15, 2017
Purchased
11 months ago
The axle to less then 30 minutes to put in an fix one problem
February 28, 2017
Purchased
1 year ago
1AACV00016-CV Axle Shaft
parts fit like they should, all good! A++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
January 21, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2009 Buick Allure Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2000-2005 Buick Century Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2005-2009 Buick LaCrosse Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2000-2005 Buick LeSabre Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2006-2008 Buick Lucerne Front CV Axle Shaft V6 3.8L Driver Side TRQ CSA82122
  • 1997-1999 Buick Park Avenue Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2000-2005 Buick Park Avenue Front CV Axle Shaft Driver Side (excluding Supercharged Models) TRQ CSA82122
  • 1997 Buick Regal Front CV Axle Shaft V6 3.8L Supercharged Driver Side TRQ CSA82122
  • 1998-2004 Buick Regal Front CV Axle Shaft Driver Side TRQ CSA82122
  • 1997-1999 Buick Riviera Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2000-2005 Chevy Impala Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2006-2009 Chevy Impala Front CV Axle Shaft Driver Side (excluding SS Models) TRQ CSA82122
  • 2000-2005 Chevy Monte Carlo Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2006-2007 Chevy Monte Carlo Front CV Axle Shaft Driver Side (excluding SS Models) TRQ CSA82122
  • 1999-2005 Chevy Venture Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2001-2002 Olds Aurora Front CV Axle Shaft V6 3.5L Driver Side TRQ CSA82122
  • 1998-2002 Olds Intrigue Front CV Axle Shaft Driver Side TRQ CSA82122
  • 1997-2004 Olds Silhouette Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2000-2003 Pontiac Bonneville Front CV Axle Shaft Driver Side TRQ CSA82122
  • 2004-2005 Pontiac Bonneville Front CV Axle Shaft V6 3.8L Driver Side TRQ CSA82122
  • 1997 Pontiac Grand Prix Front CV Axle Shaft V6 3.8L Supercharged Driver Side TRQ CSA82122
  • 1998-2008 Pontiac Grand Prix Front CV Axle Shaft V6 3.8L Driver Side TRQ CSA82122
  • 2000-2003 Pontiac Grand Prix Front CV Axle Shaft V6 3.1L Driver Side TRQ CSA82122
  • 1999-2005 Pontiac Montana Front CV Axle Shaft Driver Side TRQ CSA82122

This part replaces:

  • Hollander 447-02512L
  • OE # 88965657
  • A1 Cardone 66-1255
  • TRQ CSA82122
Part #: 1AACV00016

TRQ
Brand #: CSA82122

How-to Video:

(06:51 min)