Replaces

CV Axle Shaft Passenger Side TRQ CSA82137 - 1AACV00131

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Passenger Side

Specifications

  • Fits RH (Passenger Side)
  • Brand New
    • Not remanufactured
    • No core charge
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:48)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (2:23)
    • Bend the cotter pin straight out with needle nose pliers
    • Pull the cotter pin up and out
    • Remove the lock cover on the nut
    • Hold the hub still with a pry bar
    • Break the axle nut socket loose with a 30mm socket and breaker bar
    • Leave the nut at the end of the axle
    • Hammer the axle out
    • Remove the axle nut
  3. step : Removing the CV Axle from the Spindle (3:26)
    • Remove the ABS retainer from the spindle
    • Break the 22mm strut nuts loose and remove them
    • Tap the bolts out of the spindle with a punch and hammer
    • Pull the spindle down and out of the strut
    • Pull the axle out of the spindle
  4. step : Removing the CV Axle from the Differential (4:25)
    • Have a drain pan ready
    • Remove the 14mm bolt from the bearing on the end of the axle shaft
    • Push together to two tabs from the snap ring
    • Insert two pry bars to 3 and 9 o'clock on the axle, applying even pressure
    • Carefully work the snap ring out of its holder inside the differential
    • Remove the axle from the differential
  5. step : Installing the CV Axle to the Differential (6:40)
    • Align the axle splines with the splines in the differential
    • Work the axle into the differential
    • Insert the snap ring around the CV axle, aligning the ears up
    • Tighten the 14mm bearing bolt
    • Torque the bolt to 24 foot-pounds
  6. step : Inserting the CV Axle to the Spindle (7:31)
    • Line up the splines into the hub
    • Start the axle nut on the end of the axle
    • Reinstall the 22mm strut bolts to the spindle
    • Tighten the nuts to 156 foot-pounds
    • Connect the ABS retainer
  7. step : Installing the Axle Nut (8:28)
    • Tighten down the axle nut with a 32mm socket and ratchet
  8. step : Reinstalling the Wheel (8:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to partial weight on the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Lower the jack
    • Torque the axle to 217 foot-pounds
    • Reinstall the lock cap and new cotter pint to the axle nut
    • Reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Drain Pan
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 21mm Socket
  • 22mm Socket
  • 12mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
the part is excellent.But not compatible with the car.I had another same car am i put them to the other car.Thank for your good service.
March 2, 2017
Perfect.
The Customer relationship is superb. When the item got missing the replaced it without wasting my time. Thanks for that.
July 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2001Lexus ES300 Lexus ES300 CV Axle Shaft Passenger Side TRQ CSA82137
1997-2004Toyota Avalon Toyota Avalon CV Axle Shaft Passenger Side TRQ CSA82137
1997-2001Toyota Camry Toyota Camry CV Axle Shaft V6 3.0L with Automatic Transmission Passenger Side TRQ CSA82137
1998-2003Toyota Sienna Toyota Sienna CV Axle Shaft Passenger Side TRQ CSA82137
1999-2003Toyota Solara Toyota Solara CV Axle Shaft V6 3.0L with Automatic Transmission Passenger Side TRQ CSA82137
Part #: 1AACV00131


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82137

How-to Video:

(10:02 min)