Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Brand New
    • Not remanufactured
    • No core charge
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:48)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (2:23)
    • Bend the cotter pin straight out with needle nose pliers
    • Pull the cotter pin up and out
    • Remove the lock cover on the nut
    • Hold the hub still with a pry bar
    • Break the axle nut socket loose with a 30mm socket and breaker bar
    • Leave the nut at the end of the axle
    • Hammer the axle out
    • Remove the axle nut
  3. step : Removing the CV Axle from the Spindle (3:26)
    • Remove the ABS retainer from the spindle
    • Break the 22mm strut nuts loose and remove them
    • Tap the bolts out of the spindle with a punch and hammer
    • Pull the spindle down and out of the strut
    • Pull the axle out of the spindle
  4. step : Removing the CV Axle from the Differential (4:25)
    • Have a drain pan ready
    • Remove the 14mm bolt from the bearing on the end of the axle shaft
    • Push together to two tabs from the snap ring
    • Insert two pry bars to 3 and 9 o'clock on the axle, applying even pressure
    • Carefully work the snap ring out of its holder inside the differential
    • Remove the axle from the differential
  5. step : Installing the CV Axle to the Differential (6:40)
    • Align the axle splines with the splines in the differential
    • Work the axle into the differential
    • Insert the snap ring around the CV axle, aligning the ears up
    • Tighten the 14mm bearing bolt
    • Torque the bolt to 24 foot-pounds
  6. step : Inserting the CV Axle to the Spindle (7:31)
    • Line up the splines into the hub
    • Start the axle nut on the end of the axle
    • Reinstall the 22mm strut bolts to the spindle
    • Tighten the nuts to 156 foot-pounds
    • Connect the ABS retainer
  7. step : Installing the Axle Nut (8:28)
    • Tighten down the axle nut with a 32mm socket and ratchet
  8. step : Reinstalling the Wheel (8:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to partial weight on the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Lower the jack
    • Torque the axle to 217 foot-pounds
    • Reinstall the lock cap and new cotter pint to the axle nut
    • Reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Drain Pan
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 21mm Socket
  • 22mm Socket
  • 12mm Socket

4.80/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great Company!
Great product and shipping was on time. I would definitely order here again!!
June 29, 2017
Best customer support around!!!
I had one shaft damaged by UPS. I immediately called 1A Auto and they sent me a replacement part right away. I could not express to you how helpful they were in getting the problem solved. The parts are high quality and fit perfectly. I am very pleased with my purchase.
February 13, 2018
Excellent service
Purchased replacement axles for my 1998 Toyota Avalon. I noticed while loadimg them to take tothe mechanic the driver side box was empty. Contacted customer service and the corrected the issue. I will continue to use this site.
August 25, 2018
1 A is A1
The service was excellent and I received my parts before the delivery date when I installed my replacement parts they were a spot on match thank you 1A Ill be ordering more parts very soon
September 24, 2018
1998 Camry CV axle replacement
Ordered both driver and passenger cv axles effortlessly from the website. Both axles arrived promptly. I had one axle that was damaged in shipping but after a quick call to customer service they had a replacement axle sent to me. Although it was a bit of an inconvenience the very helpful support I received more than made up for the delay. Would order again from this company without hesitation. Highly recommend.
October 1, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who is the manufacture of these products?
Mark W March 29, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please dont hesitate to ask.
Brian F March 30, 2016
does this fits my 1997 toyota camry LE 2.2 automatic?
Milfred C May 2, 2017
No, these are specific for 3.0L engines only.
Tim K May 2, 2017
What other parts do i need to do a cv joint replacement on a 2000 Toyota avalon?
Lesheal D July 25, 2017
In most cases, the CV axles are all that are needed, but in some cases based upon wear and other factors hub and bearings could be changed or other steering and suspension components.
Alex P July 25, 2017
i cant think of any other PARTS if you buy the complete shaft assembly etc. maybe a cpl of kotter pins incase they break off etc.
Steve W July 25, 2017
No you do not it pretty much comes with everything except your tools.
P L July 26, 2017
Does it come with the boots for the c.v axle?
Kaleb K November 3, 2017
I want to say yes it came with the boots. I had a friend put them on, so I cant say 100%, but he did not mention the lack of boots. When I had it first checked out the shop mentioned the boots needed replacing so I assume they were in the box.
Robert N. B November 3, 2017
yes... complete... ready to install
Steve W November 3, 2017
Yes, these will arrive ready to install with the boots preinstalled.
Alex P November 3, 2017
yes, all you do is take the old ones out but the new ones in everythings there excellent product!
James N November 4, 2017
Danny T November 4, 2017
Winston S November 4, 2017
Year Make Model Description
1997-2001Lexus ES300 Lexus ES300 CV Axle Shaft Pair TRQ CSA82461
1997-2004Toyota Avalon Toyota Avalon CV Axle Shaft Pair TRQ CSA82461
1997-2001Toyota Camry Toyota Camry CV Axle Shaft Pair V6 3.0L with Automatic Transmission TRQ CSA82461
1998-2003Toyota Sienna Toyota Sienna CV Axle Shaft Pair TRQ CSA82461
1999-2003Toyota Solara Toyota Solara CV Axle Shaft Pair V6 3.0L with Automatic Transmission TRQ CSA82461
Part #: 1AACS00071

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82461

How-to Video:

(10:02 min)