These axle shafts are new, aftermarket parts. They are just what you need to get your vehicle back in good working order!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 88965657, 88965658
  • Approximate Dimensions:
    • Height: 5.00 inches
    • Length: 29.5 inches
    • Width: 5.00 inches
  • Built to strict quality control standards

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle (1:50)
    • Remove the hub nut
    • Hit the axle with a hammer
    • Remove the two 21mm bolts at the bottom of the strut with a piece of pipe for leverage
    • Hammer the bolts out
    • Place a drip pan underneath the axle
    • Pry from the back of the axle with a pry bar and hammer
    • Hammer the axle again to loosen it
    • Pull the wheel knuckle forward
    • Pull the axle free and move it to the side
    • Hit the axle out of the wheel knuckle with a hammer
    • Pull the axle up and out
  3. step : Installing the Axle (3:40)
    • Push the axle into place
    • Push the wheel knuckle onto the axle and push the axle into place
    • Place the wheel knuckle into the strut and replace the two 21mm bolts
    • Torque the 21mm strut bolts to 130 foot-pounds
    • Replace the hub nut
  4. step : Reattaching the Wheel (5:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 foot-pounds
    • Torque the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. step : Checking the Oil (6:06)
    • Start the car to warm up the transmission
    • Pull out the dipstick
    • Wipe the dipstick clean
    • Recheck the dipstick
    • Replace the amount of oil you need
    • Check the dipstick again

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Transmission Fluid

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 35mm Socket

5.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
0
0
0
0
fast shipping just installed both cv axels went smooth perfect fit well satisfied
September 26, 2017
Purchased
7 months ago
CV axles
Great price, quick shipping. Looking to install today. Just a note, maybe I missed this note , but the pair came and are two different lengths and two different part numbers... Possibly for a left and right side but not sure. Can't rate with stars yet until they are installed but I have to put something. Like I said maybe I missed it in the description, will look for "left & right" markings
January 27, 2018
Purchased
3 months ago
Wwwwwwwoooooooorrrrrkkkkkkksssss grrreeeeaaaate! Thank you again
March 12, 2018
Purchased
2 months ago
Exactly what I neesed
Good quality set for an affordable price. This website gives great deals. My local parts place usually charges around double for the same exact parts so ordering from here is simple, quick and easy. Great fit. No complaints.
April 19, 2018
Purchased
3 weeks ago
Good Quality
They got the job done and glad to have my car riding nice and smooth again. Thanks!
February 23, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 10 answers
Does this support cars with abs setup?
Chris W on Oct 23, 2016
BEST ANSWER: My car has anti lock brakes and i installed these axles.
These CV axles do not interfere with anti lock sensors.
So these won't fit on a 2008 impala SS?
Henry S on Jan 26, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle as long sa you do not have an SS model. These items are listed to fit your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
I have a 2000 pontiac grand prix with the crosslace wheels which wouldn't allow me to remove the axle nut while the vehicle is still on the ground. How would I go about removing the axel nut in this case?
Kade M on Nov 17, 2015
BEST ANSWER: An impact gun or breaker bar and socket is the way to remove the nut. You need to have someone apply the brake to lock the axle from rotating.

Vehicle Fit

  • 2005-2009 Buick Allure Front CV Axle Shaft Pair
  • 2000-2005 Buick Century Front CV Axle Shaft Pair
  • 2005-2009 Buick LaCrosse Front CV Axle Shaft Pair
  • 1998-2004 Buick Regal (excluding Supercharged Models) Front CV Axle Shaft Pair
  • 2000-2003 Chevy Impala Front CV Axle Shaft Pair
  • 2004-2009 Chevy Impala Front CV Axle Shaft Pair (excluding SS Models)
  • 2000-2003 Chevy Monte Carlo Front CV Axle Shaft Pair
  • 2004 Chevy Monte Carlo LS Front CV Axle Shaft Pair
  • 2005-2007 Chevy Monte Carlo Front CV Axle Shaft Pair (excluding SS Models)
  • 1999-2005 Chevy Venture Front CV Axle Shaft Pair
  • 1998-2002 Olds Intrigue Front CV Axle Shaft Pair
  • 1997-2004 Olds Silhouette Front CV Axle Shaft Pair
  • 1998-2007 Pontiac Grand Prix Front CV Axle Shaft for Models with V6 3.8L (excluding Supercharged Models) Pair
  • 2000-2003 Pontiac Grand Prix Front CV Axle Shaft for Models with V6 3.1L Pair
  • 2008 Pontiac Grand Prix Front CV Axle Shaft Pair V6 3.8L
  • 1999-2005 Pontiac Montana Front CV Axle Shaft Pair
Part #: 1AACS00018



How-to Video:

(06:51 min)