Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

 

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:52)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 32mm axle nut
    • Remove the wheel lock with the wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Rotor (1:52)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Hang the caliper aside with a bungee cord
    • Pull off the brake rotor
  3. step : Removing the CV Axle (2:28)
    • Hold the hub with a pry bar
    • Remove the 32mm axle nut
    • Tap the axle out of the hub with a hammer
    • Remove the 15mm bolt from the upper control arm
    • Tap the wheel spindle loose with a hammer
    • Separate the control arm from the wheel spindle
    • Unclip the ABS sensor wire harness from the frame with trim tools
    • Sepreate the CV axle from the hub
    • Separate the CV Axle from the main axle with a pry bar
  4. step : Installing the CV Axle (4:45)
    • Put the CV axle into place
    • Tap the CV axle into the main axle with a hammer
    • Install the CV axle into the hub
    • Connect the wheel spindle to the upper control arm
    • Tap the upper control arm into the spindle with a hammer
    • Start the 15mm bolt and nut for the control arm
    • Tighten the 15mm bolt to 41 foot-pounds of torque
    • Connect the ABS wire harness to the frame
    • Start the axle nut by hand
  5. step : Installing the Brake Rotor (6:02)
    • Put the rotor into place
    • Put an old axle nut on one wheel stud
    • Thread a lug nut onto that wheel stud by hand to hold the rotor in place
    • Remove the bungee cord from the caliper
    • Put the caliper into place
    • Start the two 15mm bolts for the caliper bracket
    • Tighten the two 15mm bolts to 85 foot-pounds of torque
    • Remove the placeholder lug nut and axle nut
  6. step : Installing the Wheel (6:52)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 162 foot-pound
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 15mm Socket

  • Specialty Tools

  • Trim Tool Set

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Cv axle 2002 ford sport trac
The parts came in 4 days. Right fit .and the how to video helped out a lot . thank you a1
March 23, 2018
Perfect fit, quick delivery
Quick delivery, perfect fit, great customer service
March 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Diddy CV axles come with abs rings on them?
Brandon S November 13, 2018
I believe thats part of the hub assembly.
A S November 13, 2018
No, it didnt. It only had a washer and a 32mm nut.
L E November 13, 2018
The ABS components are part of the wheel hub for this model, not the CV axles.
Tim K November 14, 2018
Mine came with everything, ready to install. Quality parts.
L G November 15, 2018
Year Make Model Description
1995-2001Ford Explorer Ford Explorer Front CV Axle Shaft Pair TRQ CSA82498
2001-2002Ford Explorer Sport Trac Ford Explorer Sport Trac Front CV Axle Shaft Pair TRQ CSA82498
2000Ford Ranger Ford Ranger without Pulse Vacuum Hubs Front CV Axle Shaft Pair TRQ CSA82498
2001-2002Ford Ranger Ford Ranger Front CV Axle Shaft Pair TRQ CSA82498
2001-2002Mazda B2300 Truck Mazda B2300 Truck Front CV Axle Shaft Pair TRQ CSA82498
2000Mazda B2500 Truck Mazda B2500 Truck without Pulse Vacuum Hubs Front CV Axle Shaft Pair TRQ CSA82498
2001Mazda B2500 Truck Mazda B2500 Truck Front CV Axle Shaft Pair TRQ CSA82498
2001-2002Mazda B3000 Truck Mazda B3000 Truck Front CV Axle Shaft Pair TRQ CSA82498
2000Mazda B4000 Truck Mazda B4000 Truck without Pulse Vacuum Hubs Front CV Axle Shaft Pair TRQ CSA82498
2001-2005Mazda B4000 Truck Mazda B4000 Truck Front CV Axle Shaft Pair TRQ CSA82498
1997-2001Mercury Mountaineer Mercury Mountaineer Front CV Axle Shaft Pair TRQ CSA82498
Part #: 1AACS00198


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82498

How-to Video:

(07:54 min)